Avoid seams above doorways because the slamming of the door can cause this area to crack
Some 2x4 to frame it and screw the drywall to.
Yes, if it fits in the doorway easily, you can use it.
A drywall dimpler is a drill bit used to countersink a drywall screw to the proper depth without breaking the drywall paper.
Drywall screw guns are designed specifically for drywall applications whereas cordless drills are multipurpose. The screw gun will disengage from the screw when it reaches the proper depth for the screw,a cordless drill relies on the operator to know the proper depth.
Just the same way you drywall in Britain, Turkey, Canada or Texas.
The main parts of a doorway are: # Sill # Threshold # Side jambs - frame proper # Top jamb - frame proper # Casing The actual part you are wanting to name could be threshold or sill. There is a diagram of doorway construction with names of each part at the web link listed below.
There is no effective way to do this without destroying the surface of the drywall. It is more cost-effective to simply replace the drywall.
Paper drywall tape is the same both sides.
So the front of them is flush with drywall is the correct way.
You use 1/2 inch for ceilings
It's no different on drywall than it is on any other surface. You spread the cement the same way, you apply the tile the same way.
how many decimeters are inadoor way
There are a few ways that you can repair a large drywall section. One way is to use a patching compound and apply it over the area that needs to be repaired. Another way is to use a drywall adhesive to attach a piece of drywall over the area that needs to be repaired. Cut a piece of drywall to fit the hole. Attach the drywall to the studs with drywall screws. Cover the seams with drywall tape. Cover the entire patch with joint compound. Let the joint compound dry. Sand the joint compound. Paint the patch. For getting the professional drywall patch repair service contact us.