The purpose of a Flail mower is to cut tougher, thicker grass that can not be cut by an ordinary mower. They are usually driven and often used to cut grass by roadsides.
Unfortunately, no. Flail dust is completely without purpose, and serves only to inform the player that their Ivandis Flail has completely discharged. It cannot be recovered through any use of the dust. You will need to reconstruct the flail from the beginning. Sorry!
A Mott Flail mower is a mower that is pulled behind a tractor, propelled by a power take off shaft from the tractor itself. It has a cutting bar, that has numerous knives attached that are held out straight by centrifugal force. This imower is mostly used for fine lawn cutting. You see them mostly these days cutting the center of the highways. Mott was the first with the flail mower, only they were called The Hammer Knife Mower, As others copied the design, flail became the most common name for this type mower. Mott is currently owned by the Alamo group. As old as these mowers are getting, most parts are available from Alamo (http://www.alamo-industrial.com). Sharpening is a chore. as there are many knife sets to deal with, for example a 72 inch has approx 168 knives. Each set (two) are held in by a clevis pin along with a cotter pin. The heavy duty knives were held in with a self locking bolt and nut that clamped to a steel ring that held the knives. The Flail type mower is well adapted to tall grass. They are also good to use with any rocks or stumps as the knives will flex rather than bend or break when striking them. One that is kept up with greasing /maintenance and not letting it rust out, will last many, many years of use. The design of the knives or blades decide whether the mower is fine or rough cut.
A Mott Flail mower is a mower that is pulled behind a tractor, propelled by a power take off shaft from the tractor itself. It has a cutting bar, that has numerous knives attached that are held out straight by centrifugal force. This imower is mostly used for fine lawn cutting. You see them mostly these days cutting the center of the highways. Mott was the first with the flail mower, only they were called The Hammer Knife Mower, As others copied the design, flail became the most common name for this type mower. Mott is currently owned by the Alamo group. As old as these mowers are getting, most parts are available from Alamo (http://www.alamo-industrial.com). Sharpening is a chore. as there are many knife sets to deal with, for example a 72 inch has approx 168 knives. Each set (two) are held in by a clevis pin along with a cotter pin. The heavy duty knives were held in with a self locking bolt and nut that clamped to a steel ring that held the knives. The Flail type mower is well adapted to tall grass. They are also good to use with any rocks or stumps as the knives will flex rather than bend or break when striking them. One that is kept up with greasing /maintenance and not letting it rust out, will last many, many years of use. The design of the knives or blades decide whether the mower is fine or rough cut.
The flail was mainly made of metal.
Pirates would use a cat of nine tails to flail a prisoner.The Aztecs used a flail to thresh corn.A person that can not swim will flail their arms rather than relax and float.
The Medieval Flail was invented by a human
Remove the knifes, and sharpen both the leading and trailing edge of the slanted end, which is the end opposite of the pinned end of the knife.
Joshua Flail is 6' 3 1/2".
You won't cross the pond very quickly if you continue to flail about like that. A flail is an implement for threshing grain.
There isn't a tm for the move flail in Pearl.
*
Flail would win the majority of the time.