A sewing machine attachment called a zipper foot is made with a longer finger on one side, instead of the usual fabric guide presser foot that has two fingers to hold down the fabric. The single finger is adjustable so you can sew down one side of the zipper, and then move the finger over to sew on the other side of the zipper.
Is the spiritual performance that is use by zipper
the purpose of the zipper was to make items like coats and shoes close tighter and better.
It is not included with the CS6000i, but you can add the Brother SA161 - Adjustable Zipper Foot to your oder. It is designed to work with the CS6000i.
To do up peoples shoes.
no it was done on purpose.
The best advice I can give you is write a letter to a zipper manufacturer such as YKK, JNZipper, or Supreme Zipper Industry
To do this, you must not only take off your regular presser foot, but take of the part directly above it. You must loosen the presser foot screw, and take everything off below it. Then, look for a part on the zipper foot that hooks around a little. Put that where the original presser foot and the "presser foot holder" was. Then tighten the screw. 1=Loosen the presser foot screw. 2=Remove the presser foot and the part that the presser foot snaps in and out of. 3=Find the hook-like part, the same as on the presser foot holder, and put it where the other one originally was. 4=Tighten the presser foot screw. 5=Put the zipper foot down. It should be a little bit higher than touching the sewing machine. 6=To move the zipper foot from left or right, loosen the screw in the back of the presser foot, and slide the foot from side to side! Then tighten the screw again!
the purpose of bones in the foot because if we didn't have any then we cant move or use our foot
how you can brake your foot in school on purpose is you can say that a basketball hit them in the foot or at ressus you can say you fell
The purpose of guillotine?
The purpose of club foot repair is to provide the child with a functional foot that looks as normal as possible and that is painless, plantigrade, and flexible.
WELL IT DEPENDS ON THE TYPE OF ZIPPER AND THE LENGTH OF THE ZIPPER