0
The entrance hole on bluebirds should be 1.5 inches.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Do blue birds like birdhouses?
yes, but they are very specific about what they like and the size of the hole etc. you should Google bluebird houses and find the exact information. It also depends on the food source in the area as to whether they will use the house.
What is the hole size required for a 2.5 conduit?
A trade size hole for a 2-1/2" EMT conduit connector, the hole needs to be 2-7/8" in diameter. A 3" rigid conduit can also use this size hole without the lock nuts falling into the hole.
How do you use an eyelet setter?
There several eyelet setting kits on the market with complete instructions, some of the newer eyelet kits are not as effective as the older ones, the most common problem is the wrong size hole for the size eyelet, what ever size eyelet you use, use the proper size hole (most kits have hole dies for that size eyelet) and follow included instructions.
How are bluebird trails helping bluebirds survive?
They give many bluebirds a place to live at the same time. The population can increase because of the amount of bluebirds that can nest in that area.a bluebird trail is a group of nesting boxes. this helps the bluebirds because then they have places to live and have babies.
Why is it best to use the right size drill and boring tools?
Most metals are initially drilled with a narrower drill, forming a pilot hole. Then the right size drill is used to complete the drilling of the hole by widening the pilot hole.
What is hole and shaft basis system?
The hole and shaft basis system are pre-defined tables / methods in which you use to find tolerances. If you have a set hole size and wish to find the shaft diameter and tolerance required you would use the hole basis system. If you had a shaft at a set size and needed to find the hole size and tolerance required for it you would use the shaft basis system. If you need any more info on it you could try and google it or look it up in something like the machinist handbook (probable google it aswell)
What drill bit you use for a 0.875 hole?
You use a 0.875 bit or a 7/8 bit . They are the same size.
Has size of the hole in the ozone layer changed in recent year?
Yes, it has. Size of ozone layer changes according to the use of CFC's.
What is the cost for a Bluebird Microphone?
Bluebird microphones can be purchased from any major electronic and PC retailer. Bluebirds are great for skype use and they can also be used on mobile devices that have the software that supports microphone use.
What size drill bit do i use for a one quarter inch bolt?
If you want the bolt to slide through the hole a 5/16 hole will work well.
How do you drill 0.5mm hole?
If no drill bit this size available, can use EDM service if metal is used
Why is it best to use the right size of drill it in boring holes?
Because you presumably want your hole to be the right size, not too small or too big.
