0
What is the signal span of an instrument with an output range of 4-20 mA and an input range of 0-200 psi?
Wiki User
∙ 13y ago
This question is using two instrumentation terms which are often incorrectly used interchangeably. The range of an instrument is the measurement of which it is capable and the span is the measurement for which it is calibrated. The span can equal the range or be less than the range. Whatever span you have calibrated the transmitter to will be represented by the 4-20ma output.
In this case, if the instrument has a measurement range of 200psi, you could adjust the span for 200 psi, but it would corrspond with the maximum range of 200psi, possibly introducing inaccuracies when operating near the end of the range. It would be preferable to select a device with a range of 250psi and then adjust the span so that 200 psi causes a full scale output of 20ma. This is a span of 80% of the range. (200/250)
The output of the transmitter is selected during design of a certain range which will be compatible with the other equipment in the loop. Standards are 4-20ma, 10-50ma, 0-10v and many others.
Standard instrument design procedures will normally try to select an input range that will cause the majority of the normal operation measurements to fall within 20-80% of the range.
Absolutely correct !
Note concerning range and span:
The range of any type of measuring instrument or device is determined by its physical limitations and so the design and construction of it determines the operational application limits and the aimed accuracy. For latter reason the selection of an instrument depends on both factors. The range is limited by the lowest and highest value that a device is adjusted to measure while the adjusted span is equal or smaller than the range. Note that the accuracy is only established by the range, not the span !
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What is the range of the sine function?
The domain (input) is all possible angles. The range (output) is -1 to +1.
What is the domain and range of the sine function y is equal to 2 sin x?
Domain (input or 'x' values): -∞ < x < ∞.Range (output or 'y' values): -2 ≤ y ≤ 2.
What is function and domain and range and Derivatives?
A function is a mapping or relationship from a set of inputs to a set of outputs such that for each input there is at most one output. The set of inputs is the domain. The set of outputs is the codomain or range. Derivatives are a characteristic of continuous functions. The derivative of a function at any point measures the rate of change in the output for very tiny changes in input, measured at that point.
Could this ever be the rule of a function For input x the output is the number whose square is x If so what is its domain and range?
Yes, the domain(input) would be all natural numbers (numbers greater or equal to zero). The range (output) would be all real numbers. -- Not only natural numbers would be considered part of this domain, all negative numbers are also reasonable inputs to this function, as any negative number multiplied by itself would produce a positive number..... The output (range) would therefore be all positive real numbers......
What is the collection of all output values?
Collection of all output values is called the range.
What is an input or output of a continuosly variable signal within a designated range?
The input or output of a continuously variable signal within a designated range is a sampled data or a feedback system. This accepts limited analog signal and encodes.
Can you improve voltage level in the range of millivolt into a 15volt?
A voltage amplifier (high input and output impedances) with a gain of 83.5 dB will amplify a signal of 1 millivolt to an output of 15 volts.
What is signal signal conditioning and why do you need it?
In electronics, signal conditioning means manipulating an analogue signal in such a way that it meets the requirements of the next stage for further processing. Most common use is in analog-to-digital converters.In control engineering applications, it is common to have a sensing stage (which consists of a sensor), a signal conditioning stage (where usually amplification of the signal is done) and a processing stage (normally carried out by an ADC and a micro-controller). Operational amplifiers (op-amps) are commonly employed to carry out the amplification of the signal in the signal conditioning stage.So, a signal conditioning circuit includes a logarithmic signal compression circuit for compressing wide dynamic range input signals to a dynamic range which is a predetermined portion of the dynamic range of an output utilization apparatus. There is provided, additionally, means for detecting the presence of the high level signals and superimposing a signal representative of the high level signals on the compressed signals to provide a combined output signal which, while compressed to the range of the output utilization apparatus, contains definable low level and high level signals from a wide dynamic range input signal.
What is the range of the sine function?
The domain (input) is all possible angles. The range (output) is -1 to +1.
How do you describe the domain and range of a function?
The domain is the set of values of the input while the range is the set of output values.
What is meant by the analytical working range of an instrument?
Each instrument used in analytical chemistry has a useful working range. This is the range of concentration (or mass) that can be adequately determined by the instrument, where the instrument provides a useful signal that can be related to the concentration of the analyte .All instruments have an upper and a lower working limit. Concentrations below the working limit do not provide enough signal to be useful, and concentrations above the working limit provide too much signal to be useful. When calibrating an instrument for use, the experimenter must be familiar with both the lower and upper working range of the chosen instrument.
What are the Input and output devices in CG?
Computer Graphics can use a wide range of input devices such as Digital Camera, Keyboard, multi button mouse. Output devices can include DVD, rendering software packages
Will any wireless head set work on this DVD player?
Most wireless headsets plug into a headset output connector for the input signal. On another point most of these headsets are range poor. A constant dependable signal might be as little as 10 to 20 feet, regardless of what is printed on the box.
Linear integrated circuits analysed over digital integrated circuits?
A linear integrated circuit (linear IC) is a solid-state analog device characterized by a theoretically infinite number of possible operating states. It operates over a continuous range of input levels. In contrast, a digital IC has a finite number of discrete input and output states. Within a certain input range, the amplification curve of a linear IC is a straight line; the input and output voltages are directly proportional. The best known, and most common, linear IC is the operational amplifier or op amp , which consists of resistors, diodes, and transistors in a conventional analog circuit. There are two inputs, called inverting and non-inverting. A signal applied to the inverting input results in a signal of opposite phase at the output. A signal applied to the non-inverting input produces a signal of identical phase at the output. A connection, through a variable resistance , between the output and the inverting input is used to control the amplification factor . Linear ICs are employed in audio amplifiers, A/D (analog-to-digital) converters, averaging amplifiers, differentiators, DC (direct-current) amplifiers, integrators, multivibrators, oscillators, audio filters, and sweep generators. Linear ICs are available in most large electronics stores. Some devices contain several amplifiers within a single housing.
Is a cell a output or input device?
A cell is neither an output nor an input device. A cell, also known as a cell phone or mobile phone, is an electronic device that is used for communication and can perform a wide range of functions, such as making calls, sending messages, browsing the internet, taking pictures, and playing music. While it does have input and output capabilities, such as a touchscreen display and speakers, it is not classified as an input or output device. Instead, input devices are used to provide data to a computer or electronic device, while output devices display or transmit information from the device to the user.
Does every function have a domain and range?
yes, bcoz evey function gives some output for input. Except constant function.
What is voltage of TTL circuit?
CMOS gate circuits have input and output signal specifications that are quite different from TTL. For a CMOS gate operating at a power supply voltage of 5 volts, the acceptable input signal voltages range from 0 volts to 1.5 volts for a "low" logic state, and 3.5 volts to 5 volts for a "high" logic state. "Acceptable" output signal voltages (voltage levels guaranteed by the gate manufacturer over a specified range of load conditions) range from 0 volts to 0.05 volts for a "low" logic state, and 4.95 volts to 5 volts for a "high" logic state:It should be obvious from these figures that CMOS gate circuits have far greater noise margins than TTL: 1.45 volts for CMOS low-level and high-level margins, versus a maximum of 0.7 volts for TTL. In other words, CMOS circuits can tolerate over twice the amount of superimposed "noise" voltage on their input lines before signal interpretation errors will result.CMOS noise margins widen even further with higher operating voltages. Unlike TTL, which is restricted to a power supply voltage of 5 volts, CMOS may be powered by voltages as high as 15 volts (some CMOS circuits as high as 18 volts). Shown here are the acceptable "high" and "low" states, for both input and output, of CMOS integrated circuits operating at 10 volts and 15 volts, respectively:The margins for acceptable "high" and "low" signals may be greater than what is shown in the previous illustrations. What is shown represents "worst-case" input signal performance, based on manufacturer's specifications. In practice, it may be found that a gate circuit will tolerate "high" signals of considerably less voltage and "low" signals of considerably greater voltage than those specified here.Conversely, the extremely small output margins shown -- guaranteeing output states for "high" and "low" signals to within 0.05 volts of the power supply "rails" -- are optimistic. Such "solid" output voltage levels will be true only for conditions of minimum loading. If the gate is sourcing or sinking substantial current to a load, the output voltage will not be able to maintain these optimum levels, due to internal channel resistance of the gate's final output MOSFETs.Within the "uncertain" range for any gate input, there will be some point of demarcation dividing the gate's actual "low" input signal range from its actual "high" input signal range. That is, somewhere between the lowest "high" signal voltage level and the highest "low" signal voltage level guaranteed by the gate manufacturer, there is a threshold voltage at which the gate willactuallyswitch its interpretation of a signal from "low" or "high" or vice versa. For most gate circuits, this unspecified voltage is a single point:
