1.90 meters is the standard, but from experience that will be quite low as some shower head droops down to -2" or -3" from the pipe.
ideal is 2.10m to 2.40m
Answer
If you have an especially tall person in the house, you may want to adjust it to a higher height.
With any one's shower head, it is usually at whatever height they like, but it depends on the water pressure and how much pressure you want
Additional info:
- Too high a shower head will cause the water to cool a bit before hitting your skin, making it less economical and less environmentally conscious.
- Too low a shower head is less ergonomical and causes back-aches.
Bottom line: Have the shower head roughly the same height as your head.
Check with your local community's legal codes division before installing or modifying any shower heads.
Around 190 centimetres (6'4") from the the shower floor, and anywhere up to 20 centimetres (8") from your head.
Min. 2000mm from Finished Floor Level(FFL)
Residential single showerhead between 6'-7'.
I fit all shower heads 72 inches from floor .
I mount them 70 inches from the floor of the shower.
High pressure shower heads will hold up best to hard water. However, regular cleaning is still advised.
You can get the bestseller showerhead on Amazon for just $29.99. It has high pressure and you can get a complimentary shower filter capsule if you have hard chlorinated water. Or a shower arm if your shower is too low.
Remove the shower head and clean out anything that might be blocking it, such as hair or debris. Replace the shower head and turn on the water; the water should be running.
If you are in need to additionally install other function shower head like rain shower head to your ordinary one, firstly your regular shower head extension system should have function to remove the shower head without any plumbing work. So only it is easy to install several different shower head to your regular shower head. Otherwise you have to replace the old one and then install shower head extension which has multiple functions.
The shower control should be about an average of 30 to 36 inches from the floor of the shower. That makes it easy to reach and manipulate.
to much water flowing through shower valve will cause whistle in pipes.try a new shower head with less flow[gallons per minute]amount should be on head somewhere try 2.5 gpm or less
To conserve water.
Remove the shower head and clean out anything that might be blocking it, such as hair or debris. Replace the shower head and turn on the water; the water should be running.
The ball connector is what the shower head rotates on to point the shower head in different directions
It is calcium from the water as well as mold that forms from wet conditions. Put some white vinegar and water in a baggie and tie it to the shower head over night. That should make it easier to remove the gunk on the shower head.