1/8 NPT for the location on the top back of the block near the distributor...
1/4 NPT for the location on the right side (looking from front) above the oil filter.
Depending on year and options there can be senders in either or both locations.
The weight of a thread has to do with its size. A 50 weight thread is finer than a heavier 30 weight thread. 30 weight thread is commonly used for top-stitching, while the finer 50 weight thread is used for sewing seams and piecing.The weight of a thread has to do with its size. A 50 weight thread is finer than a heavier 30 weight thread. 30 weight thread is commonly used for top-stitching, while the finer 50 weight thread is used for sewing seams and piecing.
The block size specifies the minimum amount of space that will be used when writing disk blocks. The example, if you write 300 bytes of information to the disk and your block size for the file system is 512 bytes, then 512 bytes (a block) will be written to the disk. The first 300 bytes will be used and the rest to fill out the block of 512 bytes will not be used. This allows for efficient space utilization (assuming the block size is reasonable) and for retrieval of information from the storage device.
Hand sewing is done by using a needle with thread, and joining two fabrics with the thread. Generally, for hand sewing, you would choose a thread size based on what you're sewing. The higher the wt number, the lighter (or finer) the thread is.
It is called a Die. It looks like a nut that is used on a bolt. It is made from much harder steel and cuts the grooves in the pipe like the thread on a bolt. The same thing is used to cut the grooves on a bolt, a different size one for each size of pipe or bolt.
Thread is generally used for sewing.
I don't know the size, but I know that each block that they used weighed 2.5 tons. So just imagine how big a 2.5 ton block looks like
a thread is used for sewing things together
1/2 28
the knock sensor is located toward the front of the engine block and it"s only used on ohc v6 engines. good luck!
cotton thread is used to sew and to make clothing
Cotton thread is used in creating denim.
An acme thread is the most commonly used.