0
What is the torque for the rod bearings and the main bearings for a 1965 mustang v8 289 engine?
Wiki User
∙ 14y ago
Boy did you hit the jackpot
Cylinder Head 65 to 70
Connecting rod bearing bolts 19 to 24
main bearing 60 to 70
crankshaft pulley 70 to 90
flywheel bolts 75 to 85
exhaust manifold bolts 15 to 20
intake manifold bolts 20 to 22
standard compression ratio 8.8-1
bore 3.80
stroke 2.87
firing order 15426378
oil press 35 to 60
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the largest engineyou can put into a 1965 mustang?
The Mustang will accept any engine you can find, the largest production engine was the 427
Does a 1965 Ford Mustang have a 302 engine?
No , the 1965 Ford Mustang offered the 200 cubic inch inline six cylinder and three versions of the ( 289 V8 engine ) from the factory
What is the weight of a 1965 Ford Mustang?
The weight of a 1965 Ford Mustang is between 2,445 lbs and 2.800 lbs depending on body style and engine size.
What is the Oil capacity for 1965 Ford Mustang 6 cylinder sprint?
I believe the straight 6 cylinder engine in a 1965 Ford Mustang holds 4.5 U.S. quarts with engine oil filter change
What is the Point gap setting for 1965 mustang 6 cylinder engine?
.024 to .026
What is the point gap setting for a 1965 mustang 6 cylinder engine?
.024 to .026
What is the spacing for spark plugs on 1965 Ford Mustang?
On a 1965 Ford Mustang , the spark plug gap for the 200 cubic inch straight 6 cylinder engine is .032 - .036 inch
What are the wheel torque specs for 1965 mustang wheels?
70 ft-lbs is common for most passenger cars. Always recheck the torque after a few miles, especially with aluminum wheels.
How can you tell a 1964 Mustang from a 1965 Mustang?
1 way to tell a 1964 Mustang from a 1965 Mustang is to look under the hood the 1964 relied on a generator and the 1965 had an alternator.
What is the engine oil capacity for a 1965 Ford Mustang 289 V8?
5 quarts with oil filter
How many quarts of oil does a 1965 Ford Mustang take when changing the oil?
The 200 cubic inch straight 6 cylinder in a 1965 Ford Mustang takes : 4.5 quarts with engine oil filter change
Find the starter on a 1965 for mustang?
The starter on a 1965 classic mustang is located on the passenger side of the engine at the rear. You should be able to follow the red battery cable to the starter solenoid (relay) and then down to the starter ::AverageJoeResto.com::
