What is the torque settings for the head and camshafts on a 2001 Daewoo Leganza?
[Edit]

Answer

Per the Haynes Repair manual for the Isuzu rodeo 2.2 engine which I understand to be the same. Here are the following torgue specs.

Camshaft Bearing Cap Bolts 71 inch-lbs

Camshaft Sprocket bolts step 1 36 step 2 60 degrees step 3 15 degrees

Cylinder head bolts:  4 steps

step 1 18

step 2 90 degrees

step 3 90 degrees

step 4 90 degrees

Valuve cover bolts 83 inch lbs

Please note inch pounds is used in a couple of these and that they require an inch pound torque wrench.

Improve Answer Discuss the question "What is the torque settings for the head and camshafts on a 2001 Daewoo Leganza?" Watch Question

First answer by ID3326232580. Last edit by ID3326232580. Question popularity: 39 [recommend question]

Research your answer:

Answers.com > Wiki Answers > Categories > Cars and Vehicles > Asian Cars > Daewoo > Daewoo Leganza > What is the torque settings for the head and camshafts on a 2001 Daewoo Leganza?

Our contributors said this page should be displayed for the questions below. (Where do these come from)
If any of these are not a genuine rephrasing of the question, please help out and edit these alternates.
2001 daewoo leganza head?  2001 daewoo torque values?  Complete engine torque settings daewoo?  Loosing head bolts 2000 daewoo leganza?  Torque for head bolts for daewoo leganza?  Installing a cylinder head on daewoo leganza?  2001 daewoo leganza valve cover torque specs?  How do you replace head gasket on a Daewoo Leganza?  What are the torque settings for 2000 daewoo laganza?  How do you take off a cylinder head of a 2002 daewoo leganza?  Wart are the toque settings for the cam shaft on a daewoo leganza?  The torque settings for the cylinder head bolts on a daewoo leganza?