answersLogoWhite

0


Best Answer

of 1.3 to 4.1 cSt

User Avatar

Wiki User

15y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

11y ago

About 3.5 cP.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the viscosity cps of 2 diesel fuel 68 deg F?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the hydrometer density of diesel fuel reading?

0.84 @20 deg C, but can vary with temperature.


What is the relative density to water of fuel oil?

If Water = 1 - then Fuel Oil (Diesel) = 0.867 @60/60 Deg F


Can you put diesel oil in a petrol car?

NO!!! It's not the same kind of engine. A diesel engine has glow plugs, a gasoline engine has spark plugs. A diesel engine ignite the fuel by compression, the gasoline engine ignite it with spark plugs.Some people add a SMALL amount of gasoline to their diesel fuel in the winter when the temperature falls below -20 deg celsius (5 deg below zero F), to prevent the diesel from turning waxy.


What is Kinematic viscosity of water at 20 deg centigrade?

1.3 10-6m2/s


What is the flash point of diesel?

between 126 - 204 deg F.


What does this mean Viscosity 100 deg F 64 cSt 298 SUS?

convert 64 cSt in to milipascals


What is the maximum true vapor pressure of No. 2 Diesel Fuel Oil?

True vapor pressure of distillate fuel oil No. 2 (psi) = 0.0074 + ( 0.00029 ´ ( Average Surface Temperature (deg F) ‑ 60 ) Per EPA publication AP-42


What are the Head torque settings for a 1992 1.4 diesel?

4 stages: tighten to 60 nm, back to 20nm, and then 160 deg followed by a further 160 deg.


What temperature does the Ford E350 diesel 6L fan clutch activate?

230 deg. F.


What is the thermal coefficient for synthetic oil viscosity 0 W 20?

The change volume of the oil due to differnce in temp. For example, if one litre of oil is heated from 45 deg C to 55 deg C, the quantity of oil at 55 deg C, 1007 Milli litre, then the co seeficeint of thermal expansion of this oil is 0.0007cc/cc/deg C


What gas do modern ships use?

Cargo ships predominantly use "Fuel Oil". When crude oil is refined the ligher oils [petrol, kerosene, Diesel, etc] are extracted from the top. The remaining oil is Fuel oil. This is a low quality fuel that is dark brown/black in colour and very viscous [thick]. the fuel does not flow well under normal temperature. It is generally heated up to 80 deg C before being injected into the engine.


Why is High flash high speed diesel used in ships instead of high speed diesel?

HSD is having a flash point about 32 deg C and HFHSD flash point is above 66 deg C. Ships' engines are designed with low RPM where as road running vehicles engines are designed to above 750 RPM During compression ,fuel get heated and it can be under risk of Fire due to low flash point of HSD. To avoid or minimize fire risk HFHSD(flash point above66) is used in ships