Want this question answered?
What is the voltage and current of an integrated cicuit
It depends on the voltage rating.
Since power is the product of voltage and current, you will need to find out the power rating of the headlamp when on low beam. To find the current, divide the power of the lamp by the voltage (12 V).
Through a relay or some other kind of high voltage switching device.
A resistor doesn't have a power factor. However, if a circuit is pure resistance in nature the power factor will be one when a voltage is applied and a current flows in the circuit. The power factor is a measure of the relative phases of the current and voltage in a circuit.
What is the voltage and current of an integrated cicuit
Ratio of voltage rating and current rating is called power factor in electricalAnswerPower factor can be defined in a number of ways -for example:cosine of the phase angleratio of true power to apparent powerIt has nothing to do with the ratio of voltage rating to current rating!
Wattage = voltage x amperage. Every appliance in North America is built to work at 120 V, so you have the voltage. The amperage rating is probably written in the microwaves manual if the wattage is not. Remember the amperage you put on a circuit can't be more that 80% of what the wiring is rated for in the branch circuit.
It depends on the voltage rating.
Rate of Rise of Re-striking Voltage is a voltage which is found when fault occurs in a power circuit protected by Circuit Breaker. This voltage may be twice the system voltage.
Power = (energy used)/(time to use it)Power dissipated by an electrical circuit =(voltage across the circuit) x (current through the circuit)or(resistance of the circuit) x (square of the current through the circuit)or(square of the voltage across the circuit)/(resistance of the circuit)
Since power is the product of voltage and current, you will need to find out the power rating of the headlamp when on low beam. To find the current, divide the power of the lamp by the voltage (12 V).
Voltage x current = power (watts)
Through a relay or some other kind of high voltage switching device.
The power in the circuit will increase.
A resistor doesn't have a power factor. However, if a circuit is pure resistance in nature the power factor will be one when a voltage is applied and a current flows in the circuit. The power factor is a measure of the relative phases of the current and voltage in a circuit.
Power (energy per time unit) actually depends on both. In a DC circuit, it is the product of voltage and current. In an AC circuit, it is the product of voltage x current x (power factor). The power factor is often close to 1.