220 volts.
Electricity is converted from High voltage, 3 phase on the grid to low voltage single phase for domestic use.
The nominal voltage in the UK is 400/230 V. That is 400 V line-to-line (i.e. line voltage), and 230-V line-to-neutral (i.e. phase voltage). Allowable variation is +10% and -6%.
240/220 480 volts 3 phase
The voltage of three phase is 415v and the colours are brown black and greyAnswerThe nominal line voltage is 400 V, and the nominal phase voltage is 230 V.
There is phase to phase voltage in 3 phase system.AnswerYou don't get voltage 'phase-to-phase'; it's 'line-to-line'!
Three-phase voltage in Germany is 400V, single-phase voltage is 230V.
6350.8 volts AC rms. The phase to earth voltage is ( square root(3) ) x lower than the phase-phase voltage on a 3 phase system.
The three phase voltage is 380 the hertz is 50
The voltage you are referring to is a 'line-to-line' voltage ('line voltage'), as there is no such thing as a 'phase-to-phase' voltage.480 volts. In real life, the voltage will vary slightly by up to 3% (14 V) on a properly sized circuit. Line to neutral will measure 277 volts, plus or minus 3%.
The same as in single phase with the same RMS voltage.
its 220 V 390V Y 3 phase 50Hz in most of Europe
The formula to use is, phase voltage /1.73 = phase to neutral (ground) voltage.CommentThere is no such thing as a 'phase to phase', or 'phase to neutral' voltage. The correct terms are 'line to line' and 'line to neutral'. So the above answer should read: line voltage/1.73= line to neutral voltage = phase voltage.