Crushed gravel with sand not screened out weighs approximately 120 lbs. per cubic foot. See: <simetric.co.uk> for more information.
It weighs approximately 1.75 tons. It can vary some do to the density of the material, amount of water contained in the material and type of material.
1CY of CA6=1.8TN of CA6
The weight is 1.3 tonnes
3000 lbs
do you mean cubic yards? depends upon the rock type and how fine it is, but one reference notes that one cubic foot of gravel typically weighs about 100 pounds. So 1 ton has 2000/100 or 20 cubic feet of gravel. A cubic yard is 3x3x3 = 27 cubic feet to the cubic yard Answer is 20/27 or 0.74 cu yard. I'd round that to 3/4 cubic yard. Other factors that affects the volume of gravel is the moisture content and the grading of the material. Pea gravel for instance contains all particles of a specified size, say, 1/4 inch. With most particles being the same size, the air voids in the bulk material are maximized, therefore one ton of pea graves has more volume than one ton of random size material. If you have gravel of 1/4 inch maximum size along with all sizes smaller than 1/4 inch, the air voids in the bulk material are very small because the smaller particles fill the spaces between larger particles. One ton of random size material will occupy less volume. The other factor, moisture, causes the volume of one ton of loose placed material to increase. Therefore, one cubic yard of moist gravel will weigh less than one cubic yard of dry gravel. This trait is reverse what seems logical because of the added weight of the water. What actually occurs is the moist surfaces of the gravel particles causes them to stick together in random patterns (resulting in larger air voids) rather than sliding tightly together. The increased air in moist gravel more than offsets the increased weight of water so one cubic yard of moist loose (not compacted) gravel weighs less than one cubic yard of dry gravel. Almost all gravel sales are by weight (ton) rather than by volume because of this factor.
It depends on the size of your gravel (the amount of air trapped between the rocks). If you have small gravel (decomposed granite) it'll weigh more - if you have larger rocks, (river rocks, etc) it'll weigh less. It usually ranges from 1.3, 1.4 to 1.8, 1.9 tons.
3600-4000 lbs
One ton of absolutely anything weighs one ton.
Pressure 1. On a smooth surface Say your 120lbs. body weight is acting over the whole area of both your feet ( 40 sq, in. say) , this gives 120 / 40 = 3 psi pressure. 2. Standing on gravel Your body weight is resting on a much smaller sum area ( the peaks of the gravel stones) resulting in a painful higher pressure
A yard of gravel is the amount of gravel that will fill a container whose inside dimension is 1 yard by 1 yard by 1 yard. It's a cubic yard of gravel. The metric equivalent is .9144 meters by .9144 meters by .9144 meters.
One yard of PEA Gravel weighs approximately 3,000 pounds Clarification: one CUBIC yard weighs approx 3,000 pounds.
Crushed? 3,000 pounds or more depending on how finely crushed it is.
1 cubic yard = 1.3 tons
1
(2222/9) times (the weight of 1 cubic yard of gravel, in tons)
About 2,700 pounds. Actually weight can vary up or down depending on how finely the stone is crushed, water content and the type of stone.
This depends on the size of gravel, the water content of the gravel, and the material composition of the rock used to make the gravel. Typically 1 cu.yd. of gravel wieghs 3000 lb.
$8.00
14 .
It depends how thick the gravel is being laid - at 4 inches thick, a cubic yard will cover 81 square feet.
One square yard of this should cost you roughly $35