mass = density * volume
weight = mass * acceleration due to gravity
W = (2400 kg/m^3)*(1 m^3)*(9.8 m/s^2) = 23520 Newtons
convert to pounds
23520 Newtons = 5287.5 lbs
(note 1 lb is approximately 4.448 Newtons)
2300KG. weight will vary depending on size of gravel used. this answer based on a standard 15-20mm gravel
2400kg
One cubic foot of concrete weighs about 144.05 lbs, so one cubic meter of concrete equals 2307.46 kg/m^3 or 5087.08 lb/m^3. This can vary depending on strength, additives, and other factors. ASTM C138/C138M-01a is the standard test method for finding the density (unit weight) of concrete.
It all depends on the type and sizes of the steel used. It also depends on the load that the concrete has to take at certain points. 7865kg is the weight of a cubic meter of steel. Typical examples; A pile cap could contain 400kg/m3 A heavy duty industrial slab or structure could contain 200kg-400kg/m3 A footpath could contain 40kg/m3 (all depends on the design, but numbers above should give you a rough answer)
weight of 1 cubic mitre of concrete
There are two different types of concrete; normal and lightweight. Normal concrete has a weight of 4,000 pounds per cubic yard, while lightweight concrete weighs 1,000 pounds per cubic yard less.
Concrete averages in weight between 90lbs per cubic foot to 140lbs per cubic foot. Knowing that its a simple equation. L x W x H = C x W. in this case 800 cubic feet. So basically the slab can weight between 72,000lbs and 112,000lbs. Length x Width x Height = Total Cubic Feet x Weight per cubic foot = Total Weight
concrete weight
o
One ton
It is about 150 to 180 kilograms per cubic meter of 60 MPa concrete
That is approximately 5,300 pounds.
400kg
what is the weight of concrete block work per cubic meter.
average of 0.12tons of rebars per cubic meter of concrete.
The weight can only be determined if the exact weight of the reinforcement, as well as the exact displacement of the reinforcing is known. Thus the weight should be 1 sq meter x thickness of the concrete minus the exact displacement of the reinforcing, plus the weight of the reinforcing. The weight per cubic meter of concrete is 2450 kg.
Concrete is sold in cubic (volume) measurements not square (area) measurements.
2000 to 2500 Kg/cubic meter depending upon the grade of concrete
A cubic meter of concrete weighs around 2.5 tons. The weight will vary somewhat with the composition, but usual concrete mixes (per cubic meter) contain 350 Kg of cement, 700 Kg of sand, 1,200 Kg of chippings and 150 liters of water.