The answer is 23,417 mg.
0.283 lb. per cubic inch
Those are incompatible units. Pounds per square foot is pressure. Pounds per cubic foot is density. It is like converting gallons to inches.
13.534 grams per cm3 = 0.561201354 pounds per cubic inch.
Nothing since a square foot is 2 dimensional.
Stainless Steel 321 has density of 0.29 pounds per cubic inch, which is 8.0272 grams per cubic cm.
The weight of unfilled polycarbonate is 0.0433297 pounds per cubic inch
0.283 pounds per cubic inch
Steel is an alloy - a mixture of various metals - and so its density depends on the proportion of the constituents in the alloy. The weight (not mass) varies between 9.0 and 9.3 pounds weight per cubic inch.
Teflon weighs approximately .079 LBS per cubic inch.
6.56 ounces
Solid Aluminum is 165 lb per cubic foot. Therefore, 165 divided by 1728 would be .095 lb per cubic inch.
what is the weight per cubic inch of W50 steel
Cast Copper weighs 542 lbs per cubic foot. Therefore divide 542 by 1,728 (cu.in./cu.ft) and the number is copper weighs 0.31 pounds per cubic inch, or, about 5 oz. per cubic inch
Kiln dried Red Oak at 6 percent moisture content weighs 4.444 ounces per cubic inch WRONG! 4.444 ounces per cubic inch is off by a factor of 10. It should be .4444 ounces per cubic inch
one -tenth of a pound ( 0.1 pounds) since it has a density of 0.1 pounds per cubic inch
Convert cubic foot into inches= 1728. Divide 62.5 by 1728 for weight per cubic inch. Multiply weight per cubic inch by 231 (whats in one gallon) which equals 8.355.
Between .303 and .308 lbs per cubic inch, depending.