answersLogoWhite

0


Best Answer

yield strength of 10 mm is 32214 mpa

0r 3287 kgyield strength of 16 mm is 82467 mpa

User Avatar

Wiki User

10y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the yield strength of 10MM and 16MM diameter Mild steel bars?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Civil Engineering

How you chance 10mm steel bar to 8mm steel bar give formula?

Calculate cross sectional area of 10mm bar amd 8mm bar, then divide them and you will get the no. of bars. For Eg. - Area of 10mm bar = 78.53 sq.mm Area of 8mm bar = 50.26 sq.mm No. of 8mm bars in replacement for 10mm bar = 1.562 bars [ theoritical] In practical u'll provide 2-8mm bars.


What is maximum pitch spacing for spiral reinforcement in the columnc or piles as American building code recommends 10mm diameter bar size and maximum pitch 75mm .Did any other code recommends more?

*


Rolling margin of steel rod which is used for construction?

Rolling Margin is the deviation of actual unit weight to that of Standard unit weight as per IS Standards. Rolling Margin is calculated as : Sectional weight = Weight of Steel Bars dia wise / length of the bars. As per IS Standards unit weight of the Bars is calculated as dia x dia / 162 Rolling Margin is deviation of actual sectional weight to that of IS Standard unit weight. Standard Rolling Margin for different dia reinforcement bars used for construction purposes: 8mm to 10mm +- 7% 12mm to 16mm +- 5% 20mm & Above +- 3%


What is the soundness of cement?

soundness is nothing but volumetric change of the cement .Presents of chemicals such as CaO,MgO will react with the water present in the cement paste and it will increase the volume of cement paste while hardening.It may causes cracks in the building to avoid that it is necessary to find the soundness of cement before using that.It may vary to each type of cement even for each batch.Soundness should not exceed 10mm for OPC.