Many hotels that use paint use satin or semi-gloss latex paint in their interior applications.
If you have the required satin or semi-gloss base product and pigment, you can.
If you want to turn your satin paint into flat wall paint simply mix one to one. One gallon of flat to each gallon of satin. The flat wall paint will obliterate any sheen the satin once had.
Yes
If they are both of the same base you can. Satin paint can be an acrylic or a latex,or an oil. Check on the can cleaning instructions for base. Jason Pollock used both in his work 'Bluepoles' which hangs in the Canberra museum I think
There are different kinds of satin paint - you'd have to know if it was latex, oil, enamel, alkyd etc.
It will get glossy for sure, they do make a satin clear this will Allow you to compound out light scratches. If you were going to try to rub the scratches out of satin or flat paint that area will get a gloss.Hope this helpsJimmy
Yes, as long as the surface is free of dirt, wax and grease, and the eggshell and satin are both the same type, ie latex or oil, then you should have no trouble at all painting a satin sheen paint over an eggshell. Also, if the base is water based and the topcoat is oil, that will work fine too.
Add a little talcum powder to the paint.
Satin is lower gloss than semi-gloss paint. Paint finishes in order of decreasing gloss are: * Gloss * Semi-gloss * Satin/Low sheen * Flat Some manufacturers call Satin/Low sheen finish Eggshell, and others regard this as a finish between Satin/Low sheen and Flat paint. The higher the gloss finish the easier it is to clean, the higher its durabillity and the more it shows surface imperfections.
No, you can dull satin or semi-gloss but not the reverse.
Yes but there is no guarantee that the colour on the surface will not streak or show a different colour through. Added to this is the fact in many houses in particular there are spray polishes used. These become airborne and do make their way to pained surfaces even if you don't actually polish that surface directly. Its a safer bet with same colour paint to give it a light rub with sand paper , then wipe with a clean damp cloth and then the satin coat should adhere to a much better standard