a welsh plug is a plug in the side of the block and the heads. these fill the holes left after casting.they actually allow the sand to be removed that is used during casting so as you have a hollow block which allows for the water jackets. in the USA these welsh plugs are called freeze plugs. they really do not stop the coolant from damaging the block if coolant freezes they are specifically to block the casting holes
i also have a 97 Taurus and today is started to lose lost of coolent between the oilpan and engine. i cant see wheres coming from but my guess is it could be the freeze plug. or welsh plug. ihave been looking alnight with out luck.
Not at all, really.
ANGLESEY or YNYS MÔN (in the Welsh language)
Welsh Socialist Republican Movement was created in 1979.
The wives and mothers of Welsh coal miners.
A welsh plug is a soft metal dished plug that is inserted and expanded in place by lightly tapping on the crown. It is commonly used to plug holes.
The Welsh plug in the yoke is no longer sealed. The yoke will need replaced.The Welsh plug in the yoke is no longer sealed. The yoke will need replaced.
If your asking about FREEZE OUT PLUGS then it has 8 of them.
water freezes and expands popping the welsh plug
its purpose is if the engine was to extremely overheat it would blow out saving your block from cracking
I know for a fact that people in Wales are called Welsh.
The Ford 300 cu in straight six has one welsh plug in the back of the head and two in the back of the block, one of which is for the camshaft.
i also have a 97 Taurus and today is started to lose lost of coolent between the oilpan and engine. i cant see wheres coming from but my guess is it could be the freeze plug. or welsh plug. ihave been looking alnight with out luck.
'gyda dy Gymraeg di' is 'with your Welsh'
The Welsh word for "Welsh" is Cymraeg :)
ymchwil Gymreig = Welsh research ymchwil Gymraeg = Welsh language research
No Welsh equivalent.