 |
What is wrong if you change the windshield washer motor and the fuse is OK but you still get no washing solution pumped out?In: Mazda Protege |
[Edit] |
paperclip, or something small, or blow air through the nozzle. its just clogged.
Answer
your washer tubing or spray nozzles may be clogged. You can remove the tubing from the spray nozzles on the hood and run a small piece of wire in them to clean it. if the tubing is clogged then replace it,it is cheap. try that only if the washer pump is working, you should hear it run when you hit the switch.
First answer by ID1067278976. Last edit by Manualanimal. Contributor trust: 136 [recommend contributor]. Question popularity: 59 [recommend question]
Answers.com > Wiki Answers > Categories > Cars and Vehicles > Asian Cars > Mazda > Mazda Protege > What is wrong if you change the windshield washer motor and the fuse is OK but you still get no washing solution pumped out?
Our contributors said this page should be displayed for the questions below. (Where do these come from ) |
| If any of these are not a genuine rephrasing of the question, please help out and edit these alternates. |
