Wheel bearings or u joints
tie rod
replace c/v joints
chiken
loose or bad u joints.
You probably need your bearings repacked
CHECK THE EXHAUST.MINE WAS HITTING THE BODY AT BOTTOM OF REAR FENDER
Could be many things, ball joints usually make clunking noises (usually one when turning and one when turning the wheel from turning), cv joints usually make a clicking noise and vibrate under load. Have it checked out, les schwab will do it for free (check it).
soounds like steering wheel fluid needs to up
Sounds like its from one side? Ur shocks
remove the plastic milk jugs and discard them. The clunking noise should stop.
That'll be an airlock, bleed the heater and it will go way
If the noise keeps going as you turn it's PROBABLY CV joints. If it's just one "pop", then it's probably a worn or loose suspension component. I'd suspect the strut.