1. Its a rollover cable. 2. I'm not doing all your Cisco questions. 1. Its a rollover cable. 2. I'm not doing all your cisco questions.
Its a rollover cable.
roll over cable which is also known as console cable.
Console cable. DB4
Proper console cable Terminal emulation software
Rollover cable (also known as Cisco console cableor a Yost cable) is a type of null-modem cable that is often used to connect a computer terminal to a router's console port
Refer to the exhibit. Cable A is plugged into the console port on switch S1. What is required on the PC for a network technician to enter the initial configuration on S1?
The ethernet cable is used to connect your console to the internet (wired). You need this to actually get a network connect on the Xbox 360.
If you connect to the router via the console port then you are physically making a connection with a physical cable to the router. This implies you have to be close to the router itself. Using telnet allows you to connect to the router from anywhere in the network, and doesn't require a physical cable connection.
if you are allowed to Telecom network is a Telephone and Cable TV Network and computer network involves computers. What did you do
A Cable/DSL gateway is a network gateway. It is used to establish a connection between DSL and Cable TV to a computer network by physical means, such as through LAN or a wireless network.
A cable terminal is a fixture designed to be installed in the end of a cable or conductor in order to facilitate the connection.
A battery terminal or a battery CABLE terminal. If the terminal is gone or destroyed on the battery, you need a new battery. If the cable terminal is terminal, you can buy an after market replacement or a complete new cable with terminal at most any auto parts store.
The Network Interface Card (NIC) or modem (Dial-up) controls the flow of data between your computer and the cable.
Whether or not a network cable is connected to your computer.