Do an internet search for Winchester Stock Oil by John Kay. He was a master restorer of old Winchesters and developed a finish like Winchester used before the 1940s. It is 100% linseed oil based, as were the original finishes, with a tint to give the Red-Brown Winchester color.
With a stock oil pan, it should only be about five quarts.
Linseed Oil
Yes, there is a way to make hardwood floors look new without refinishing. Cleaning the floors with a mineral oil based cleaner will make them like new. Murphy's Oil Soap has enough mineral oil to accomplish this task. There is also a product on the market called Amish Oil that will also clean hardwood floors.
800 RPM should yield about 25-40 lbs. of oil pressure on a stock motor.
oil-x
mccull oil
You rub oil into it.
go to your local marine dealer & get a teak oil kit it has. a cleaner. a bleach. & a bottle of teak oil. there are instructions on the box. good luck
5Qts with stock oil pan
min of 5 psi at idle 45 to 68 at 3000 rpms
The first step in refinishing a metal fire escape is to clean it. After it is cleaned, you will need to use an anti-rust metal primer. Then you can paint it, using two coats of exterior oil based, high gloss paint.
For all of you doubting Thomases.....Otis Oil and Gas is coming back to life. Hold on to your britches!!!! Or, should I say, "Hold on to your stock certificate!"