By tradition, green is the color used for the ground cable (note: NOT the Earth return or "neutral"; that's traditionally the white).
Under the hood on the driver side there are jump start posts. Hook the red cable to the red (+) post and the black cable to the (-) post.Under the hood on the driver side there are jump start posts. Hook the red cable to the red (+) post and the black cable to the (-) post.
Under the hood on the driver side there are jump start posts. Hook the red cable to the red (+) post and the black cable to the (-) post.Under the hood on the driver side there are jump start posts. Hook the red cable to the red (+) post and the black cable to the (-) post.
You will need a voltmeter. Hook the red cable to the + post and the black cable to the - post and it will show the voltage.
To hook up jumper cables, attach one cable from the negative post on one battery to the negative post on the other battery. (These usually are marked "-" and have a blacl cable attached to them.) Attach the other jumper cable from the positive post on one battery to the positive post on the other battery. (These usually are marked "+" and have a red cable attached to them.)
Connect the Positive + battery cable to the positive + battery post first. Then connect the Negative - cable to the negative - battery post.
Hook the red cable to the red jump start post, under the hood, passenger side. Hook the black cable to the metal stud under the hood pass side.
Audio battery???? If you mean Auto Battery then Red Positive (+) RED cable goes to Positive (+) post on battery. Black Negative (-) cable goes to Negative (-) post.
If you mean what battery post the cable hooks up to, it's to the post marked with a negative (-) sign; if you mean where the cable hooks up to from the battery post, it's to the metal frame and usually held in place with a bolt.
there is a positive battery post under the hood of the car that you use for your positive cable hook-up and then connect your negative cable to any metal portion on the engine.
Yes. Just hook the red cable to the red post, black to black and turn the charger on.
You can hook the red cable to the positive jump start post on the side of the air cleaner (push the round red part back), and the black cable to the stud on the inner fender. The other option is to remove the flooring on the driver side to access the battery directly.You can hook the red cable to the positive jump start post on the side of the air cleaner (push the round red part back), and the black cable to the stud on the inner fender. The other option is to remove the flooring on the driver side to access the battery directly.
Hook up the jumper cables in this order: (1,2,3,4) (1) One end of positive cable to positive post of GOOD battery (2) Opposite end of positive cable to positive post of DEAD/LOW battery of disabled vehicle (3) One end of negative cable to negative post of GOOD battery (4) Opposite end of negative cable to GROUND on disabled vehicle (a good ground is preferred over the negative post, however, the cable can also be hooked to the the battery post). To remove the jumper cables after starting, reverse the order (4,3,2,1)