answersLogoWhite

0


Best Answer

1 inch to 20 inch Dia of pipe.

Please answer me as soon as possible. If possible, give me equation for the same.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What press force you need to have to flatten ms round Pipe for 1 to 20 pipe and 750mm length and 12mm thickness of wall?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Mechanical Engineering

How do you calculate the collapse pressure for pipe?

For calculating the collapse pressure of a pipe, you first need to calculate the Hoop stress, which is given by :- Stress = Circumferencial Force/(radial thickness*axial length) If the stress crosses this value the pipe would collapse.


What is the units of ima of a lever?

Length of input arm (input force to the fulcrum) divided by the Length of the output arm (output force to the fulcrum)exampledin/dout=2cm/4cm=0.5in the example the IMA is 0.5


Is it the stress that produces strain or strain produces stress?

A Force applied to an object will cause a displacement. Strain is effectively a measure of this displacement (change in length divided by original length). Stress is the Force applied divided by the area it is applied to. (eg. pounds per square inch) So, to answer the question, it is the applied Force that produces both stress and strain. Stress and strain are linked together by various material properties such as Poisson's ratio and Young's Modulus.


What is the centrifugal force on a turbine blade if a London bus is hanging from the blade?

A ball park figure for the weight of a double decker bus might be about 15,000 kilograms. But to calculate the centrifugal force on a turbine blade with this hanging from it would require the blade length and the rotational speed of the turbine.


What is the object's modulus of elasticity depends upon?

it does not depends on the material dimensions (cross sectional area and length) and the force exterted on the material. It only depends on nature of the material

Related questions

What is the formula for the MA of a wedge?

MA= resistance force / effort force = Fr/Fe


What force is needed to bend 1.5 inch square in tubing?

it depends on both the tube wall thickness and the length of the bend and how much you bend it. Otherwise you cannot determine force.


What the meaning of magnitude?

Extent of dimensions; size; -- applied to things that have length, breath, and thickness., That which has one or more of the three dimensions, length, breadth, and thickness., Anything of which greater or less can be predicated, as time, weight, force, and the like., Greatness; grandeur., Greatness, in reference to influence or effect; importance; as, an affair of magnitude.


What is the definition of magnitude?

Extent of dimensions; size; -- applied to things that have length, breath, and thickness., That which has one or more of the three dimensions, length, breadth, and thickness., Anything of which greater or less can be predicated, as time, weight, force, and the like., Greatness; grandeur., Greatness, in reference to influence or effect; importance; as, an affair of magnitude.


How much force can a lever take before it snaps?

That would depend on various factors: the lever's length, width and thickness, its material, and whether it has any defects.


What is the root meaning of magnitude?

Extent of dimensions; size; -- applied to things that have length, breath, and thickness., That which has one or more of the three dimensions, length, breadth, and thickness., Anything of which greater or less can be predicated, as time, weight, force, and the like., Greatness; grandeur., Greatness, in reference to influence or effect; importance; as, an affair of magnitude.


Are there inherent DANGERS in leg press?

To much force applied to the leg press has been known to flatten legs.


What is a compressional force?

A force or pressure that attempts to flatten or squeeze a material. forces acting on the body from all direction (generally all 4 directional sides) which result as the compression in body that type of force is called compressional force


How much force does it take to flatten a full pop can 355ml vertically?

Typically it takes between 100 and 170 pounds to crush an empty soda can. It varies depending on the can construction thickness and individual can flaws.A full soda can can support vastly more weight because of the support given by the incompressible liquid inside. It could possibly support upwards of 200+ pounds of force.


How do you calculate the collapse pressure for pipe?

For calculating the collapse pressure of a pipe, you first need to calculate the Hoop stress, which is given by :- Stress = Circumferencial Force/(radial thickness*axial length) If the stress crosses this value the pipe would collapse.


Length of spring 6mm what is the extension spring?

multiply the force with length.


Force is measured in units of what?

[Force] = [ mass x length / time2 ]