mop and glow or pinesole.
You shouldn't use any wet products on laminate floors.
You can put the newer style floating wood floors onto a floor with tile. Also, if it is old VCT tile, there are glues that will allow you to use their product to glue the wood to the floor. Unfortunately, nail down wood is not acceptable.
no. . .that would be a bad idea ceramic tile should not need any kind of coating. . .if you don't like the look, you bought the wrong tile
If you are installing a floating laminate floor, you can easily put it right over the tile.
yes the tile has to be fixtures and then put the tile
If your laminate didn't shine out of the box, nothing will really shine it. A clean floor shines more then a dirty one. Use a good laminate cleaner, like Pergo's.
First you have to add a staircase. then you must press the "move up floor" button then put a wall around the second floor on top of the first floor wall. then you place in floor tile. You might have to put in floor tile before the wall. You can always change the kind of floor tile later. I hope i helped.
First you need to identify what kind of tile you have. Ex. ceramic slate stone granite marble For each of the types there is a different way to get the shine your looking for. First clean the tile. Don't use acids or strippers because they can fade or change the color of the grout. Use vinegar and water. 1 part vinegar for 4 parts water. This alone may give the floor a nice shine. I use it when I do a final clean of floors I install. Next go to Lowe's Home Depot and get a tile seal. You will need to know what type of tile you have to determine what kind of seal you need. This seal will protect and give the floor a shine. It comes in many different varieties Main categories to look for are: original seal, semi-gloss seal, high-gloss seal. Now depending on the tile and the type of seal you got. You will need to seal the floor. Apply as many coats of seal as you want until you get the shine that you are looking for. Keep in mind to allow the floor to dry 2 hrs or whatever is recommend in between coats. To apply the seal is simple. Just spray it on and wipe it up with a sponge or cloth not colored be sure its white and sponge is some neutral color so it doesn't bleed onto tile. Be careful not to allow the seal to form puddles as they will leave white spots. Be sure to talk to someone in flooring dept before leaving to make sure you have everything you need.
If the floor finish in the room that the closet opens from is tile, and the base of the closet is at floor level, having the same floor finish in the closet is attractive and makes it easy to clean.
Tile contractors are the same thing as tile setters in that they both put tile and grout on your floor. However, each setters and contractors have their own specialty .
have a basmentless home. had tile put in kitchen and dining room. floor always appears damp and slippery. could there be a crack in the base of concrete causing tile to be damp. it is dangerous to even walk on. cannot aford to put rugs in. liz
not candle wax but the wax that you can put wax warmer it was spilled