All you need to do is buy a ring and pinion gear from summit racing or jeggs that will fit your rearend and a installation kit, you will want to go with a 3.55 or 3.73 rear gear if you want more power.
At th power steering pump reservoir.
To remove the windshield trim on a 1968 Chevy Impala you will need a trim removal tool that has slides which can release the locking clips.
The price of a car depends on its condition, and mileage. A well taken care of 1968 Chevy Impala convertible price can be between $15,000-$28,000.
pick up a chiltons repair manual at the library for your model car.
if it has been rebuilt regular unleaded,but if it has alot of miles mid grade or high grade
nope
The vin # is located on the driver side of the cowl above the brake master cylinder/brake booster on the cowl tag. The 1968 chevy vin # does not have a letter or # that tells if the car is a super sport or not. 1967 was the last year that an impala ss was identified in the vin #.
Your local auto parts store will sell you an inexpensive tool for under $10 to remove the clip from behind the handle to release handle from door.
No, the chevelle isn't as wide as the impala, you would have to get a rear end from a full sized Pontiac or olds.
210 horse power with a 2 bbl carb
There were 23,741 1968 Chevy Novas produced in that year, alone.
An individual can try looking for 1968 Impala parts at his or her local car dealerships. They might have some available parts. If not, Craigslist or advertisement from newspaper may have it offer also.