0
What should the low side read on gauge r-22 freon at 85 F outside?
Wiki User
∙ 11y ago
60 to 80 pounds
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you read R22 gauges?
To read gauges,you must know which is low side/high side,if you know that, then depending on which freon you are using,you read the pressures matching the temp,for example,looking at the low side gauge(blue gauge) look at R-22 freon,you will see that 40 degrees,will equal to 70 psi
How do you check freon on central ac?
how do you check freon on central ac and what should the guages read.
Where is the outside temperature gauge on a car?
Usually the gauge in on the dashboard with all the other gauges. That way you can read it while driving.
How do you recharge the ac on a 98 Monte Carlo z34?
using a can of the proper type of Freon, connect a gauge and the Freon to the low side ac port. With the engine and ac running, open the valve and allow the Freon to flow until the gauge shows full. Read the directions on the can and be mindful of the can, as the out side of it gets cold enough for your hand to stick to it.
What part of fuel oil gauge do you read?
It is necessary to read the density and the quality of the gauge. You should see the lower side.
What should the temperature gauge read?
Usually around 220.
Outside temp gauge is wrong buick regal?
If the outside temperature gauge is not reading the right temperature on a Buick Regal, perhaps it has become damaged. It can also not read the right temperature if it is wet or covered with dirt or snow.
What should the temp gauge read on a V6 2000 dodge Dakota 4X4?
Aroun the middle of the gauge, 195-210
What should the voltage gauge read on a S10 Blazer?
13.9 to 14.2 volts.
How do you check freon pressure on central ac?
with a set of freon guages. The smaller copper pipe should be warm to hot. The larger copper pipe should be cold and in hot humid weather dripping water from condensation. what should the guages read.
How will you know how much freon your car needs?
first read up on it then read the gauge... theres a cool new kit called "A/C recharging for dummies" at the parts store.. also Everyone should have a manual for their vehicle, and the library should have a professional shop manual available, for FREE, in the reference section(make copies of the correct sections) read up and fix it like a PRO! :) good luck-Dave
How do you read the auto temp gauge to know where the needle should be when the temperature is correct?
normally the gauge should be in the middle.(between hot and cold) that is concider operating temp.
