answersLogoWhite

0


Best Answer

It really depends on the material you are drilling. Thinner material will use a smaller pre-drill bit. Try drilling a sample hole on a piece of scrap or where it will not be visible Then try your screw. Adjust your hole size if necessary

User Avatar

Wiki User

14y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

11y ago

A number 25 .1495" will leave the hole perfect for thread forming.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What size drill bit for 10 metal screw?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What drill bit size for a 832 screw?

That size is 8-32. The drill bit for a clearance hole is 11/64, or a #17 drill bit.


What size drill bit for 5-16 lag screw?

I use 1/4 drill bit for a 5/16 lag screw in most materials.


What drill bit to use with different size screws?

If they are self tapping screws, the drill bit is as thick as the solid barrel of the screw. If you want the screw to go through easily to have a nut on the other side, then the drill bit is slightly larger than thread size.


What size drill bit should you use for a hole to be tapped for a .25 x 20 screw?

I use a 3/16 drill bit for that.


What size pilot hole do you drill before using the countersink bit in stainless steel?

I drill a pilot hole the size of the 'barrel' of the screw. -I always use a combination drill bit for sinking screwheads. The first part of the bit is the diameter of the 'barrel' of the screw and the step, one inch higher is the size of that screw's head. (The barrel is the diameter inside threads) -I have a set of these drill bits for #6, #8, and #10 screws and they are great.


What makes a drill bit a screw?

Drill bits and screws are not the same and cannot be converted. vido produces drill bits with high quality, exported overseas and loved by the public. If you want to buy a drill, you can go to VIDO's official website to check.


What is the difference between a stone drill bit and metal drill bit?

metal drill bit has a finer point


How do you drill 0.5mm hole?

If no drill bit this size available, can use EDM service if metal is used


What is a combination drill bit?

It's one that has a point of a basic screw size, and a bit further up it widens to the size of that screws head, so you can make a countersink hole with the same drill.


What size screw can you use with 8.5 cm drill bit?

That's a pretty big drill bit, -it drills a hole just a tad larger than 3 3/8 inch wide.


How do you install brass address plaque on brick?

Use a drill bit that works on brick, drill a hole big enough to hold a metal dowel that will hold the screw that holds the numbers.


What drill bit is best suited to drill into lead?

Use a brand-new bit for metal mounted on a hand drill (not electric). Slowly rotate the bit in the lead, which is a "soft" metal.