In a Cold Climate and Hot Climate: Each ton of heat pump capacity can heat/cool approximately 500-600 square feet.
In a Moderate Climate: Each ton of heat pump capacity can heat/cool 600-700 square feet.
So either a 5.0 ton heat pump in a cold climate
or a 4.5 ton heat pump in a moderate climate.
How many ton heat pump need
2 ton
I would recommend 1 HP
I would go with a 2 1/2 ton to 3 ton unit but to be sure But to be accurate have a HVAC&R specialist perform a J Load analysis on your building.
You install a three ton geothermal heat pump system
An acre is 400 sq ft. So, divide the size of the lot (in square feet) by the # of sq ft in an acre and... voila!... the size of your lot in acres! 150ft*200ft = 30000sq ft 30000 sq ft / 42000 sq ft = .71 Acres
25 cubic feet
There are various factors which go into determining what size heat pump you need for a space. As a rule however, am 1100 sq ft house typically requires around a 3 ton unit.
usually around 400sq. ft room give or take
Rule of thumb, around 300 sq ft give or take.
2 ton
3.5 Tons
what is the answer to the above question that I had asked
1000 sq ft
Answer: 2800 m² = 30138.949 ft² OR 30138 ft² and 136.6 in²
A 4 ton heat pump should be fine, depends on how well your house is insulated. If the house is well insulated you might be fine with a smaller unit.
400 sq ft
Well, it depends on the size of heat pump and the size of pool! However, a 30x12 ft, 2-3.5ft deep pool with an 18kw heater will take 4 to 5 days.