Use a bolt extractor. It is not recommended to reuse the head bolts, that is why they are designed to not fit a 12mm or a 13mm.
Pore strips would help remove them and it will also remove the oil on the area which you use the pore strips on.
you can use nose strips
a very painful way to remove hair from legs, arms, face, etc... usually cloth strips with hot wax on them...
put water on it and let it get off cut etc.
It's been chaged in 52 years later before they remove Pogo, Catfish, Crock And Tiger, it's now 2009 and the strips are old.
to remove impurities so that it can be more reactive
Remove the right front passenger seat, it is not difficult to remove. The carpet can be moved out of the way once this is done(there are even velcro strips to make it easy). Now remove the floor board and this will expose the cover where the spark plugs are located. Remove this cover and use a deep well socket and extension as the plugs are way down inside the head. This is really a very easy job and goes fairly quickly.
You heat the back of them with a hairdryer as you slowly pull it off.
In the shower in the morning. Pull from one side to the next slowly, don't too hard or you may remove some skin!
You must open the hatch, remove the plastic strips then you must unbolt the tail lamp assembly and remove the bulb.
look at the plugs your going to plug in the strip, also pick one with an on/off switch, and socket closers, these are safety measure for strips.
shave it or use wax strips painful to some men but works very well