If you have a set of open end wrenches , keep trying them until you get the right size. It's probably fairly large and Metric so start with 15mm and work your way up.
You can, or a wrench.You can, or a wrench.
The Hummer was created on 2006-11-15.
Hummer Badlands happened in 2006.
9mm hex (allen) wrench to remove two bolts for the front cailpers on a 2006 Escape.
Hummer Badlands was created on 2006-04-11.
A 5/8" socket wrench.
The last h1 hummer was manufactured in mid 2006.
2006 lincoln navigator requires a 7mm hex to remove brake caliper
It is mounted directly onto the power steering pump. Held on with two clips that are a pain to remove.
1x1
I believe it is 16mm
The low pressure sensor on a 2006 Hummer H2 is located on the top rear of the engine. It is behind the intake manifold.