answersLogoWhite

0


Best Answer

the caliper bolts require a 3/8" Allen wrench. You can buy these as a socket at just about any parts store.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What size wrench is needed to remove the caliper bolts on the front brakes of a 1995 Chevy Suburban?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What size wrench is needed to remove the caliper bolts on the front brakes of a 2001 Chevy Suburban?

It takes a T55 Torx bit on the front calipers.


What size wrench is needed to remove the caliper bolts on the front brakes of 1979 Chevy blazer?

It should be a 3/8" Allen wrench.


What Tools are needed to replace brakes 96 Grand am?

To replace the brake pads on a 96 Grand Am, three tools will be needed. First, a C-Clamp, then a hex key to remove the caliper bolts, and a screwdriver to work the caliper free.


What size wrench is needed to remove the rear caliper mount bolts on a 2002 Chevy Suburban?

if it is the same as the 2004 then you would be looking for a 14mm or a 9/16 size


What size wrench is needed to remove the caliper bolts on the front brakes of a 1990 Plymouth Acclaim?

I'm pretty sure that takes a 7mm Allen key.


Which bolt to take out of the caliper when changing brakes on a Chrysler Pacifica?

THERE ARE TWO BOLTS ON EACH SIDE OF THE CALIPER REMOVE THOSE AND PULL THE CALIPER OFF


What tools are needed to change the brakes on a 1997 town car?

Lug Wrench to remove tire & Wheel Socket Wrench or Hex Wrench to remove Caliper bolts Large "C" clamp to collapse caliper piston Rags, and a good spray brake cleaner


What size wrench is needed to remove the caliper bolts on the front brakes of a 99 Pontiac sunfire?

You need a 3/8" allan key or hex socket - not a torx


How do you remove rotor 2002 ford explorer?

# Raise and support truck on jackstands and remove tire # Remove the brake caliper.After removing the caliper bolts suspend the caliper out of the way with a piece of wire.On front disc brakes remove the 2 caliper mounting bracket to steering knuckle bolts and detach the mounting bracket.On rear disc brakes the rotor can be removed after the caliper has been removed


How do you replace rear disk brakes on a 2001 Ford F-150 2WD?

Remove the tire then remove the brake caliper take the pads off and replace them just like you removed them. Put the brake caliper back on you will need to bleed the brake line on the caliper add brake fluid if needed and put the tire bak on.


What size Allen socket is needed to remove caliper bolt on a 2004 Escape?

What size Allen socket is needed to remove bolt from caliper on 2004 ford escape


What size wrench is needed to remove the caliper bolts on the front brakes of a 2003 Volvo s60 awd?

I don't know what size but on an 01 S60 you need an Allen wrench.