answersLogoWhite

0


Best Answer

Here are some codes that generally work with a Vizio TV: 627, 506, 766, 505, 678

First, press and hold the clear TV button until all mode lights light up. Once that's done, release it and the TV light will be blinking. Enter a code from the list above and press #. The TV button should flash 3 times. Try the TV functions (Volume, Power, etc..) and see if it is working. If there is no function, repeat the process with another code.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

11y ago

The steps below will assist you in programming the DISH remote to a TV!

Addressing Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.

2.) Release and TV light will be blinking.

3.) Enter code and press #. The TV button should flash 3 times.

4.) Try functions (Volume, Power, etc..) and see if it is working.

5.) If no function, repeat steps 1-4 with another code.

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

I have listed the steps below to program the remote!

Addressing Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.

2.) Release and TV light will be blinking.

3.) Enter code and press #. The TV button should flash 3 times.

4.) Try functions (Volume, Power, etc..) and see if it is working.

5.) If no function, repeat steps 1-4 with another code.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What steps are taken to program a vizio tv to a dish network remote?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Program a dish network remote to the receiver?

Addressing the remote to the receiver is pretty easy. You can view the steps below to get that taken care of! Addressing Remote to Receiver: 1.) Go to System Info screen. 2.) Hold down the SAT button until all mode lights light up. 3.) Enter a number between 1 and 15 using the numeric keypad on the remote. 4.) Press the pound (#) button. 5.) Once the SAT button blinks three times, press record. 6.) Test remote and see if it works.


How do you program keyless entry remote on 01 Toyota sequoia?

A keyless entry remote on a 2001 Toyota Sequoia can not be reprogrammed at home. The key must be taken to a dealership where the engineers can program it with new settings.


What action is taken by a host on an Ethernet network when the host attempts to contact a remote host on another network?

The packet is sent using the IP address and MAC address of the default gateway.


How do you program keyless entry remote for 2003 kia sorrento?

first of all, you cannot program the key individually..it need to be taken to the dealership or the company which the car was purchased.


What are the steps that must be taken to upgrade the BIOS?

i would expect start by getting the program to upgrade it, at the manufacturer's website


Various steps to be taken in Planning?

Define goals and objectives: Clearly outline what you want to achieve. Conduct research and analyze data: Gather information to inform your planning process. Develop a plan: Create actionable steps to reach your goals. Implement the plan: Put the plan into action and track progress.


What are the three steps that must be taken when a file is used by a program?

1. Open the file, Process the file, Close the file


What steps need to be taken to the black lace cactus?

There are no steps to be taken but the habitat.


What steps has Kenya taken to modernize?

No steps were taken by governmentThousands of slaves were taken from Kenya and put into the slave trade


How do you Program doors remote transmitter for Toyota Tundra 2001?

if you have taken the battery out of your remote you will have to take it to the dealer it has no memory after you take the battery out. dealer told me if i would have changed it out in about 5 seconds it might have saved its memory. i found out the hard way


Write any 5 Steps taken by government to protect Indian Rhino?

GOVERNMENT has taken steps


What steps are taken to complete a dry heat winterization?

what steps are taken to complete a dry heat winterization?