Coaxial, RG-59.
what type of cable would you used to create a ring topology?
check your local codes for this
RG6 cable is a coaxial type commonly used for domestic video systems. It is most often used as a feed from an antenna or from a satellite dish to receivers. As well as RF signals, the cable can also be used to carry base band video signals although this is not a common application for this type of cable. There are a number of connectors used with it including F conectors, BNC, RF and UHF types.
The VGA cable that you would use to connect a laptop to a projector screen is called a PS2 projector cable.
The purpose of a cable puller is to allow a system of wires to pull a heavier load. A cable puller will then be used to feed the cable through on this system.
fibre optical cable
A Sky Extension Cable is used to extend cable leads for a Sky television system. The price should be around $10 for a few meters of cable, it can increase based on the type of cable.
Yes, Its the same type of cable used by satellite TV installers.
Crossover cable
Coxial cable is used from the wall to the modem. From the modem to the computer an RJ-45, or ethernet, cable is used.
It depends on the type of LAN; the most common cable in a LAN is UTP cable. In older LAN types you could also use coaxial copper cable. For UTP cable that would be Cat 5, cat 5E or above for most LANs.
Type a and type b connections almost always refer to a USB Cable.