answersLogoWhite

0


Best Answer

What my brother and I did in his house. (He had a older house where nothing was actually square.) We taped off the molding with that blue painters tape and then used some drywall mud to help "blend" the places where the moldings did touch. We let this dry and then just repainted the ceiling where we patched it. It was a little time consuming, but it definitely looks a 100% better now. Hope this helps. You can also use a nice quality paintable caulk to fill in the gaps. It looks great when finished.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What type of material do you use to fill between the crown molding and the ceiling where it isn't flush?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Natural Sciences

Can ozone machine while in use cause cracks to crown moulding?

Ozone is a strong oxidizing agent, but I wouldn't expect it to crack wood in any concentration that isn't actually toxic. If your crown molding is plastic, then maybe.


What is compressed wood crown molding?

It is called M ultiple D ensity F iberboard, MDF which is a actually a waste product that is glued and pressed together. One of the most installer friendly types of crown on the market. Just don't use it where it can get dinged up ie. casing and baseboards. Very good to use on walls and corners that are not truly straight.


Who was the scientist who found the fake gold crown?

The name of the scientist who found the fake gold crown was Archimedes.


How do you remove a crown moulding light cover from a fluorescent ceiling light fixture?

To remove a crown moulding light cover from a fluorescent ceiling light fixture, follow these steps: Locate the clips or latches that hold the cover in place. These are usually located on the back or sides of the cover, and may be hidden by the crown moulding. Gently press the clips or latches to release them from the ceiling light fixture. Be careful not to break or damage the clips or latches. Carefully lift the cover away from the ceiling light fixture, being careful not to damage the cover or the light fixture. If the cover is difficult to remove or if it seems like it is stuck, try gently wiggling it back and forth or using a flat tool to gently pry it loose. Once the cover is removed, you should be able to access the light bulbs and other components of the light fixture. To replace the cover, simply reverse the steps, making sure that the clips or latches are securely fastened before turning the light back on. For Further Detail visit Here: homelyitems,com


If Archimedes had only been able to find a piece of pure gold with a mass one-half that of the crown how could he have determined whether the crown was pure gold?

Archimedes came across concept of density - that is MASS divided by VOLUME. For each substance this ratio is different but a CONSTANT for that substance. Thus the mass you are dealing with is irrelevant if the crown had the same ratio as the piece of pure gold then the crown was pure god, if it did not then the crown was not gold.

Related questions

What is the difference between bed molding and crown molding?

sorry don't know


Crown Molding?

form_title=Crown Molding form_header=Install elegant crown molding in your home! Would you like crown molding in your whole house?= () Yes () No What is your budget for the crown molding?=_ What style of crown molding do you want installed?=_ Has there been crown molding in your home before? = () Yes () No


Is the name for trim along a ceiling spelled crown molding?

Yes, the name for trim along a ceiling spelled crown molding.NOTE 1: American English the name is spelled Crown Molding.NOTE 2: British English the name is spelled Crown Moulding.This molding hides the line where a wall meets the ceiling. Crown molding, whether plain or decorative, adds interest to a room. It comes in plain wood that needs painted or stained, or it can be bought pre-painted or stained. The corners must be mitered, usually at 45-degree cuts -- e.g. cut at an angle to meet the next piece. Here is a video about cutting and installing Crown molding.


Crown Molding Adds Style to a Room?

Crown molding adds style and a finished touch to rooms that need a little help with decor. Crown molding is the topmost molding that is installed where the wall meets the ceiling and adding it can change the look and feel of a room instantly. There are many types of crown molding available in various woods and synthetic materials like Styrofoam and plastic. With new lighter weight materials, installing crown molding is no longer a tedious job for a carpenter and can be a home project that the homeowner can do with some direction and skill. Choosing The Crown Molding Crown molding is available in many different designs and heights, so the style of the room is important. Tips for selecting the right crown molding for the space: * Ceiling height - the lower the ceiling height, the simpler and smaller the molding. Adding a heavy, ornate crown molding to a room with an 8’ ceiling is not a good idea because crown molding will visually lower the ceiling height. Keep it simple and small for low ceilings. Heavy, decorative molding is great for ceiling heights above 10’ that can afford the loss of height. * Room style - coordinate the style and feeling of the room with the style of the crown molding. If the house is extremely modern, a heavy, decorative traditional molding will not blend well with the decor and will visually detract from the simple image and feel of the modern space. * Finish - decide on paint or stain. The finish should coordinate and complement the decor in the room. If stain is better, crown molding is available in a variety of woods such as pine, poplar, oak, maple and cherry. If paint is better, wood or synthetic moldings are appropriate, but the synthetics like foam, Styrofoam or mdf are much lighter, cheaper and easier to install. Making The Purchase * Estimating material - measure around the room on the floor or the wall. Measure each wall length, then total it and add another 10 - 15% for waste. Crown molding comes in precut lengths: wood moldings are usually in 12’ or 16’ lengths; foam moldings are 8’. Example: if all 4 walls (15’ each) total 60’ + 15% waste (addl. 9’) = 69’ needed. If the molding comes in 8’ lengths: 69 divided by 8 = 8.625 pieces - round up to 9 pieces. * Delivery - remember that crown molding comes in precut lengths, the smallest is 8’. Most local companies will allow customer pickups, but if you can’t accommodate the sizes it’s best to schedule a delivery. Most local companies will deliver materials either free or for a nominal charge.


Material that starts with the letter c?

· cabinets · cable · carpet · caulk · ceiling fans · ceiling tiles · ceramic tile · chair rail molding · chandeliers · chimes · cinder block · circuit breakers · clapboard · coax cable · concrete · countertops · crown molding


What is dentil crown molding?

Molding collection includes quality crownMolding, chair rail and decorative wood Molding. Architectural trim for doors and windows as well as for ceiling and wall. Flexible trim includes crown, chair rail and baseboard Molding crown molding that has a toothed effect at the bottom.Composition mouldings or 'compo' is a putty like substance used to create architectural enhancements like plaster crown mouldings for ceilings. Reverse cut wood moulds detailing the design are pressed into the composite material, then set into joinery sections such as architraves and dado rails or dressed onto plaster models to create classical ceiling motifs. Dentil ornament looks indeed like rows of teeth; this design has been an architectural motif for centuries. It is often found on ancient Roman buildings inspired by Greek architectural themes.


Popcorn ceiling all around crown molding cracking and falling down?

Sounds like a roof leak or a foundation settling problem.


How do you cut crown molding when you have a angles ceiling?

Consolidated Builders here... to help you visualize the concept...when looking at your radial arm saw imagine the fence is you ceiling corner but upside down....make a line on the saw as reference on how you hold the material at true 45 degree. i prefer to cope my work. www.consolidatedbuilders.org


Decorative Molding Repair?

form_title=Decorative Molding Repair form_header=9493 What has to be taken care of?*= [] "Window casing [] Door casing [] Wall molding (paneling, wainscoting, and chair rail) [] Ceiling molding (picture and crown) [] Floor molding (baseboard, base shoe, and base cap) [] Fireplace mantel [] Cabinetry [] Crown molding [] Railing [] Several small interior finish carpentry repair projects [] Other" What caused the damage on your finish trim?*= [] Attached remodel or construction [] Weather [] Accident [] Wear and tear [] Water damage [] Pests [] Other


Generally speaking, does crown molding increase the value of a home?

Crown molding is considered an upgrade. Any upgrade can potentially increase a homes value.


With 8 ft ceilings would a counter height dining room table dwarf the room?

I would but you could add crown molding and different colored paints to give the ceiling a higher appearance.


What are some alternatives to wood for crown molding?

Foam is the most popular alternative to wood crown molding. It is very durable and you can find it at your local Home Depot or Lowes.