0
What type of network topology is usually depicted when a hub is used with ethernet?
Wiki User
∙ 6y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Which topology is the most commonly used server network topology?
The most common LAN topology is that of a "star." In a star topology, each computer, or "node", is connected to a central hub. This is more reliable than a more classical "ring" topology, because a node failing will not bring down the entire network. A bus topology is arguably more reliable, but has poorer performance.
What type of printer has an Ethernet port to connect directly to the network?
It's called "network printer". Such printers usually have either wireless or LAN interface.
What cable often associate with a bus topology network?
Local Area Network Cable usually associate with a bus topology network. In a Bus topology network simple LAN cables are used with LAN Hubs ( i.e. having a collection of LAN ports ) which in turn connect many systems with the server systems. LAN cables are available in various length ranging from 1meter onwards.
What is a network tropology?
The physical topology of a network refers to the configuration of cables, computers, and other peripherals. Physical topology should not be confused with logical topology which is the method used to pass information between workstations.In communication networks, a topology is a usually schematic description of the arrangement of a network, including its nodes and connecting lines. There are two ways of defining network geometry: the physical topology and the logical (or signal) topology.The physical topology of a network is the actual geometric layout of workstations.above tropologies are described belowBus - Both ends of the network must be terminated with a terminator. A barrel connector can be used to extend it.Star - All devices revolve around a central hub, which is what controls the network communications, and can communicate with other hubs. Range limits are about 100 meters from the hub.Ring - Devices are connected from one to another, as in a ring. A data token is used to grant permission for each computer to communicate.
For n devices in a network what is the number of cable links required for a star topology?
15 usually but it can change over time
Which port is used to connect your computer to a network?
The "Ethernet Port" Obviously is used for the Ethernet cable which often connects computers to a router. A router is a device that gets the Internet or from the phone/Internet port and routes it to your computer routers are required for ADSL and ADSL2+ to work. Oftener more than one computer is connected to the router. But this setup may be different for "Cable Internet because i have never had cable.
What is local area network and ring topology?
A Local Area Network (LAN) may use many different types of topologies (how the network is physically wired). If one uses a ring topology, then a special type of managed hub is usually used which implements packet switching in a round, ring structure, in which each station is visited by the packet in linear sequence. Ring topologies also involve the use of a 'token', which describes whether a station on the ring may use the network or not. Ring topology can be considered as a LAN and it is rarely used nowadays.
How would a repeater be used in an Ethernet segment?
Repeaters are usually used in coaxial based ethernet networks. For this purpose they are used to extend the length of a network segment. For example, in a 10base2 ethernet network the maximum length of a segment is 180 meters. A repeater could join two segments together to increase the length of the network and the number of clients in the network. In today's modern networks you will see neither coaxial networks nor repeaters in a LAN. Repeaters are used for DSL transmissions, but not for LANS.
What are the components of a network card?
A network card, or network adapter as it is sometimes called, allows a computer to connect to a network of other computers. These devices will usually have both a physical layer and a data link layer. Ethernet devices will most often have an 8P8C socket where the network cable can be connected.
What doe a hub do?
In computing an ethernet (network) hub is a device which usually looks like a small box with ethernet jacks on it which allows you to connect different devices together and allow them to act as one network segment. These days hubs are less common being replaced by routers or network switches instead.
Does lan run Ethernet protocol?
Yes, usually. Other options are possible, but Ethernet is the dominant technology (family of technologies, actually - there are several versions of Ethernet), in LANs.Yes, usually. Other options are possible, but Ethernet is the dominant technology (family of technologies, actually - there are several versions of Ethernet), in LANs.Yes, usually. Other options are possible, but Ethernet is the dominant technology (family of technologies, actually - there are several versions of Ethernet), in LANs.Yes, usually. Other options are possible, but Ethernet is the dominant technology (family of technologies, actually - there are several versions of Ethernet), in LANs.
How do you get my mac to connect to the internet when there is no wifi?
Connecting to the Internet is usually done through a modem/router. If these do not provide a wireless network then it will need to be wired usually by connecting an Ethernet cable between the router and the computer.
