Nothing!
Nothing!
How much pump oil goes into a Troy Bilt Pressure washer Model 020242
5 oz
Some website says 30w non-detergent?
See link; the OEM part # is a 5.3 OZ. bottle http://www0.shopping.com/xPF-Briggs-Briggs-Stratton-Synthetic-Pressure-Washer-Pump-Oil-5-3-oz-190585GS
Honda K2400HH pressure washer pump how much oil do you need to put back in
A Karcher pressure washer pump requires 15W40 non-detergent oil. It takes 4 ounces and doesn't need to be changed because the oil will last the for the lifetime of the pump.
The manual says to buy a bottle from an authorized dealer and shows no amount, however Sears has the replacement parts and a on-line manual which sells the aforementioned oil. It is a full synthetic oil in a bottle which Sears lists as 5.3 oz. That is what I will put in my 01903 pressure washer. Hope this helps.
30 Weight Non-detergent Oil
The troy bilt 2200 Pressure washer uses SAE 30 oil for the Motor,and the pump uses Power washer Pump oil you can buy at Lowes in the section selling parts for your power washer. (special oil treated to keep the seals and the pump running ) The pump oil drain is under the unit ,next to the hose connections for the pump .Use a 5/16 allen wrench to remove the black plug drain out old oil and replace with new oil put in the same amount that was taken out. Look under the power washer and you will see a 3/8 plug for the motor oil,I used a 3/8 ratchet wrench long extension to remove this plug,drain out old oil replace plug. Fill to the the full level on the dip stick.
where does the rear & front pumps goes on a 2005 Yukon washer resvior
In a pressure washer the pump creates the pressure, but the unloader regulates it. A pump on a 2000 psi machine may be rated for 3000 psi, but the unloader keeps it running at 2000psi. On an electric machine, as the pressure goes up, so will your amp draw. Your Max PSI is probably the maximum pressure you can run that machine at and not overload the motor. Ben - Great Lakes Cleaning Systems www.GreatLakesCleaningSystems.com