0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Is a 93' crown Victoria alternator compatible with a 94' thunderbird?
Only if it is the same engine, and wire and bolt pattern.
Can a soch 240sx transmission fit a doch engine?
A SOCH 240SX transmission will fit a DOCH engine. They have the same gearing and bolt pattern so they are compatible.
Will a 350 engine be compatible with a 300 Super Turbine transmission (for a 1967 Buick Skylark 300c.i. engine 4.9L)?
Chevy and Buick shared the same block-to-trans bolt pattern back then.
Bolt pattern for 73 grandville with the 455 engine?
It has a 5x5 or 5x127 bolt pattern.
What is the bolt pattern of a 2008 Chrysler sebring limited with a 3.5 engine?
The bolt pattern for what part?
Is bolt pattern 5x110 fit on 5x108?
No it will not fit. The vast majority of bolt patterns are exclusive only to their category and are not compatible with other bolt patterns.
Can you remove an 1982 Jeep CJ7 258cid L6 oil pan without pulling the engine?
Yes you can, but you must loosen the passenger side motor mount and jack up that side of the motor to get to the one oil pan bolt under the mount.
Is the d16z6 a compatible engine with a 1991 Honda Civic Hatchback Dx?
it will bolt it but you have to wire the VTEC
What is the Bolt pattern for a 1986 dodge ram 1500?
need more information, clarify the engine and which bolt pattern
Can you put a 350 rocket that came out of a 1969 cutlass into a 1990 Chevrolet caprice?
A 350 Oldsmobile engine has a different bolt pattern than the Chevrolet engine. The 350 Olds and 350 Pontiac engines have the same bolt pattern. The 350 Chevrolet and the 350 Buick engines have the same bolt pattern. Unless you have a dual bolt pattern transmission (there are some out there) in that Chevy, the Olds engine won't bolt into the Chevy transmission.
What is a compatible engine for a 1994 Honda Civic Dx?
any sohc from 92-2000 should fit bolt-on
Does the Toyota 18R have the same gearbox bolt pattern as the 21R engine?
The bolt pattern is the same, but the 21R engine has 2 locator dowels, which must be accurately marked and drilled on the gearbox, if it has come from an 18R. The bolt pattern on the crankshaft end are not the same, so the flywheels are not interchangable.
