To remove melted plastic and fabrics, heat at low
setting just until material softens, and scrape off with
a smooth piece of wood, a wooden spatula or half a
clothespin. If some remains, make a paste with baking
soda and water and rub or try silver polish. Wipe off
with damp cloth. For a non-stick soleplate, rub gently
with nylon mesh pad and suds. Acetone or nail polish
remover may remove melted polyester.
Taking rubbing alchohol to the white mark in your nylon clothing helps remove the white out.
Salt stains on nylon boots can be removed with soap and water. The salt can also be removed by allowing it to dry and then rubbing it off.
this was my question and I scraped the residue off with a razor blade
If they are iron filings, you can use the property of magnetism to remove the iron filings using a magnet. You will need to rinse the iron filings with water after you remove them with the magnet in order to completely remove the sawdust from them.
Yes , Silver Carbonate can be used to remove iron purities beceause Iron being more reactive than silver replaces silver from silver carbonate . Hence Iron impurities can be removed .
NO, you cannot iron a patch onto nylon, the nylon will melt. You will have to sew it on.
iron is an element
Taking rubbing alchohol to the white mark in your nylon clothing helps remove the white out.
My Black & Decker Sure Steam iron has a chart on it with suggested settings for different fabrics, and it has a setting for nylon (the second to lowest setting) and suggests not using steam, just a dry iron. I have a 100% nylon mesh blouse that I ironed on this setting, and put a cloth napkin over the area I was ironing to be safe and had no problems.
No. An object cannot rust unless it contains iron.
wash it with bleach
weld it with nylon rod using iron plastic welder.
Iron at the following temperature:One dot Cold iron (110°) for acrylic, nylon and acetate.Two dots Hot iron (150°) for polyester and wool.Three dots Very hot iron (200°) for cotton and linen.
Salt stains on nylon boots can be removed with soap and water. The salt can also be removed by allowing it to dry and then rubbing it off.
Ankle/Wrist Weight made from Nylon fabric and Iron Sand.
Use a magnet to remove the iron, a filter or screen to remove the sand, and a still to remove the salt.
An iron cannot remove wringles, however, an iron can remove wrinkles. Depending on the fabric or material the article of clothing is made from will determine what setting the iron should be set on. An iron has a metal plate that conducts heat, and in turn when the iron is applied to an article of clothing, this heated plated will remove wrinkles when the iron is moved back and forth across the wrinkled area.