I don't have the pictures but found some by googleing Camry egr valve. You can start there and that might be enough to get you going.
On the throttle body.
Throttle position sensor is located at the throttle body. There are only two sensors there. The one facing the firewall is what you are looking for.
on a 1992 Camry the map sensor is attached to the center of the firewall by a bracket and has a rubber vacuum hose connected to it.
It's next to the timing belt gear. The sensor can be accessed from the the firewall side.
it is located just below the water pump/thermostat housing on top of the compressor is the plug in and the sensor is under the compressor
The crankshaft position sensor must be behind the timing belt cover next to the crankshaft and behind the crankshaft pulley. The camshaft position sensor is again under the timing belt cover next to the camshaft and behind and the camshaft pulley. Is it the same place in 2000 Camry 4Cyl? Do you have pictures of the location? Hard or easy to replace, and what tools do I need? Thanks alot
The ECT or the Engine Coolant Temperature Sensor is a switch. This switch is located on the bottom of the radiator in the 1996 Camry.
The Speed Sensor Is Located on the transmission. On The Top Towards the Back
It is located on the bottom of the radiator
The 2001 Toyota Camry has 16 valves.
The 2002 Toyota Camry has 16 valves.
The 2010 Toyota Camry has 16 valves.