0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Where can you get a diagram for suzuki samurai sway bar?
See the related links below.
Is a suzuki samurai bumper strong enough for a tow bar?
No, you need a tow bar receiver installed. It will mount to the frame.
What is the correct tire pressure for a 1992 Suzuki samurai?
tire pressure for rear is to be 1barand on the front 1.7 bar
What is the purpose of an anti roll bar?
anti-roll bar is used to reduce body roll
Does a 2000 Jeep Wrangler have a roll bar?
it has a roll bar that is bolted to the body its called a sport bar not much protection compared to a roll bar welded to the frame
Install a Roll Bar?
form_title=Install a Roll Bar form_header=Roll bars can be a valuable source of protection in the case of an accident. Do you use this car for going off road?= () Yes () No Will you need just the roll bar or a full roll cage?= () Roll Bar () Roll Cage Is your car a convertible?= () Yes () No
How you can solve Automatic roll bar MB problem?
If your roll bar is in the up position after you hit a bump or something like that, you only need to press and hold the switch(for the up and down position of the roll bar)pressed in for the up position for about 5 to 10 seconds. Doing this you reset the roll bar. After that the roll bar will work as normal Roger(Norway)
What is an anti-roll bar?
An anti-roll bar is a bar which is stressed to reduce the effect of a car leaning to one side during cornering.
How do you mount a 3 point seatbelt in a 79 jeep cj5 that only had 2 point before?
Drill holes into the Roll Bar to attach the 3rd point. The rest should bolt in the stock bolts.
What rhymes with tollbar?
roll bar
What is arb link in a car?
Anti-Roll Bar or Sway Bar
Why won't 2001 clk 430 Mercedes convertible roll bar go down?
the reason the roll bar won't go down is ,either roll bar was activated by an impact or it was activated if vehicle was jacked up with keys in the ignition. You will have to do a manual reset on the roll bar to reset. this is done with the tool provided in your tool kit.
