if your uing air tools on the compressor then you will put one or two drops directly into the inlet where you connect the compressor hose
You should not put any oil in a Ford air conditioning compressor. The air conditioning compressor runs on Freon. The system should take about one pound of Freon.
Air tool Oil
What kind of air compressor is it? And if it is oil lubricated no!
Yes you can actually and it's much cheaper than using compressor oil that is non detergents. The nice thing about air tool oil is you can use it for up to 7000 hours on the air compressor before needing to chang it.
The main difference between an oil free compressor and an oil flooded compressor is the method of injection to compress the air for mechanical equipment, most common being construction equipment. In the oil free compressor, air is injected with screws while an oil flooded compressor uses oil injected into the holes to create a seal.
Yes you can actually and it's much cheaper than using compressor oil that is non detergents. The nice thing about air tool oil is you can use it for up to 7000 hours on the air compressor before needing to chang it.
Yes!
Compressor oil ! ( light clear mineral oil)
In the reciprocating compressors, you fill the crank case with the lubricante. In screw compressors, there is a reservoir to separate oil from compressed air, that reservoir works as the oil sump of the screw compressor. in big centrifugal compressor oil is placed in an oil tank, and than is pumped to bearing casings by means of mechanical or electrical pump.
Yes you need an air compressor that will give you an adjustable air suspension.
PAG oil goes in the air conditioner compressor. It is added in the same place as the refrigerant. However, this oil must be added before the lines for adding the refrigerant are put in place.
This is an oiless compressor; it requires no oil at all.