4.6 centimeters
.31 inches to the right
At a measure of approx 7.4164 inches.
Just after the mark for 6 inches.
25.4mm equals 1 inch so... 7 mm is 9/32 of an inch Direct Conversion Formula 7 mm* 1 in 25.4 mm = 0.2755905512 in
It is between the marks for 1 inch and 2 inches: approximately three times as far from 1 as it is from 2.
Five eighths of an inch on a ruler would be located between the half-inch mark and the three-quarter inch mark.
4.6 centimeters
1.18 inches on a ruler would be located between the 1 inch and 2 inch markings on the ruler. It would be slightly closer to the 1 inch mark than the 2 inch mark. Keep in mind that most rulers are divided into 16 equal parts per inch, with each tick mark representing 1/16 of an inch. So, on a standard ruler, the 1.18 inches mark would be located slightly beyond the 18/16 (1.125) mark and slightly before the 19/16 (1.1875) mark.
between 5 3/4 and 6 inch marks almost to the 6 inch mark, but not quite
It is 2/10 past the one inch mark on a ruler.
It is three quarters of the way from the 3 inch mark towards the 4 inch mark. Imperial rulers are normally marked in 16th of an inch with the 4th and 12th marks slightly longer and the 8th even longer. The 4th mark is ¼, the 8th mark is ½ and the 12th mark is ¾; 3.75 inches is 3¾ inches so on such a ruler it is the 12th mark to the right of the 3, and will be slightly longer than the 3 marks either side of it.
It's almost exactly 1/5 of the way from the beginning of the ruler to the 1-inch mark.
It is between 1 inch and 1.5 inches, but closer to the 1.5 inch mark. It is essentially just short of the 1and 7/16 inch mark
Every half inch.
You start at zero, the one marks an inch from the zero mark, signifying one inch
inch ruler
It is 3/10 of an inch before 2 inches on the ruler