On our 1994 LHS it is located on the passenger side of the engine down by where the transmission is bolted to it. I had to remove the air intake pipe and push it out of the way, squeeze my left arm down through the opening to the left of the strut almost to my elbow and follow the connector wires to the sensor. One 10mm socket removed the single bolt holding the sensor (a tight fit ). A quarter turn of the ratchet was enough to loosen the bolt so I could unscrew it with my fingers. Wiggle the old one out and replace. Takes about 15 minutes.
The sensor in the distributor is the crankshaft position sensor.
The crankshaft position sensor on a 3.5L Chrysler Pacifica is located next to the motor, toward the rear. It can be found next to the transmission.
what is the crankshaft position located on a 2014 Chrysler 200 3.6 live
It is on the top rear of the transmission bell housing.
where is crankshaft position sensor and camshaft position sensor on a 2004 Jetta 2.0 gl
It is located back by the belhouseing on the left side.
The crankshaft position sensor mounts to the top rear of the transmission bell housing.
how to replace the crankshaft position sensor located in a 2003 kia rio
Where is the crankshaft position sensor located on Audi 2002 Audi TT
It is on the top rear of the transmission bell housing.
It is on the top rear of the transmission bell housing.
The crankshaft position sensor is located on the front of the engine. It is just to the left of the crankshaft pulley.