answersLogoWhite

0


Best Answer

The crankshaft position sensor on a 1988 Chevrolet Celebrity 2.8 liter engine (VIN W) is located in the middle of the engine block on the rear side of the engine (as mounted in the vehicle). It inserts into a hole in a surface that comes out at about 45 degrees from the engine block facing upward and to the rear. It is held in by one bolt that should be torqued to 8 Newton meters (71 pound inches). As mounted, the bolt is to the left of the sensor. On a 2.5 liter engine (VIN R), the sensor is attached to the back of a plate that the ignition coils are attached to (the ignition module). This one slides into the engine block in roughly the same place as on the 2.8L, except it slides in horizontally (into the vertical surface of the side of the engine block), not at a 45 degree angle. The module is held onto the engine block with three bolts that should be torqued to 27 Newton meters (20 foot pounds). You'll have to raise the car to access either one.

User Avatar

Wiki User

17y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Where is the crankshaft position sensor on a 1988 Chevrolet celebrity?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the crankshaft position sensor on a 1987 Chevrolet celebrity?

The crankshaft position sensor on a 1987 Chevrolet Celebrity is on the side of the engine nearest the firewall. I need to know which engine to give a more specific answer.


Where is the crankshaft sensor located on a 1987 Chevrolet celebrity 2.8?

The crankshaft position sensor is located on the lower engine block beneath the exhaust manifold on the firewall side of the engine.


Does a 1983 Chevy Celebrity have a crankshaft sensor?

No, the 1983 model does not have a crankshaft position sensor. Only distributorless engine needs a crankshaft position sensor.


Where is a crankshaft sensor on 1990 Chevrolet celebrity?

On the 2.8 V6 engine the crankshaft position sensor is near the bottom center of the block on the side nearest the firewall. On the 2.5L 4 cylinder engine the crankshaft position sensor is behind the ignition module below the intake manifold.


Where is the crankshaft sensor located on a 1987 Chevrolet celebrity 4 cylinder 2.5?

It on the back of the coil packs going into the side of the block.


Where is the crank position sensor on the 2006 Chevrolet trailblazer?

7 oclock position behind the crankshaft pulley


Where is a crankshaft sensor on 88 celebrity?

The location of the crankshaft position sensor depends on which engine the car has. If it is the 2.5L 4 cylinder engine the crankshaft position sensor is behind the ignition module. If it is the 2.8L V6 engine the crankshaft position sensor is on the side of the engine nearest the firewall and just above the pan rail in about the center of the block.


Crankshaft position sensor 1995 silverado?

The crankshaft position sensor on a 1995 Chevrolet Silverado is located on top of the timing case. The part can be purchased at any auto parts store.


Where is the crankshaft position sensor located at on a 1996 Chevrolet lumina with a 3.1L engine?

the back


Where is crankshaft position sensor for 89 Chevrolet celebrity?

The location of the crankshaft position sensor depends on which engine your car has. If it is the V6 the crankshaft position sensor is on the side of the engine block next to the firewall. It is low on the block in about the center of the block. It is held in by a single bolt. The knock sensor is also back there but is screwed into the block with pipe threads On the four cylinder engine the crankshaft position sensor is behind the ignition control module which is below the intake manifold toward the rear of the engine. You can follow the spark plug wires to it. Changing it is a real nuisance but can be done with the engine in the car.


Where is the crankshaft sensor located on 87 Chevy Celebrity 2.8l?

On a 1987 to 1990 Celebrity with 2.8/3.1L engine the crankshaft position sensor is on the side of the block beneath the exhaust manifold on the firewall side of the engine.


Trottle position sensor voltage on a 1989 Chevrolet celebrity?

According to my factory service manual the throttle position sensor voltage on a Chevrolet Celebrity should be between 0.5 V and 5.0 volts as it moves through its range of motion.