Slide in under the front of the engine and look at the left bottom side of the timing cover and you will see the sensor. it is bolted in place with 1 10mm bolt.
The crankshaft position sensor on a 1987 Chevrolet Celebrity is on the side of the engine nearest the firewall. I need to know which engine to give a more specific answer.
The crankshaft position sensor is located on the lower engine block beneath the exhaust manifold on the firewall side of the engine.
the back
It should be above the starter on the engine block.
Crankshaft position sensor circuit malfunction.
The 1999 Chevy Lumina 3.1 liter engine crankshaft position sensor is located on the back of the crankshaft. A diagram can be obtained from most Chevrolet dealerships.
On the 2.8 V6 engine the crankshaft position sensor is near the bottom center of the block on the side nearest the firewall. On the 2.5L 4 cylinder engine the crankshaft position sensor is behind the ignition module below the intake manifold.
It signals the engine computer controlling timing and fuel regulator.
If the crankshaft sensor is dead the engine will not start
It is at the front of the engine, below and to the left of the damper.
It is bolted in the side of the engine block behind the starter. You will have to remove the starter.
The 1998 Montero Sport crankshaft sensor will be located on the rear of the engine. The crankshaft sensor is on the inside of the rear engine cover.