Raise the hood, and start looking down from the middle of the hood. As soon as you get below the windshild into the engine compartment you will see it mounted with two rubber hoses connected to it.
The EGR valve is connected above the water hose on the 2002 Mazda Millennia. The EGR valve is responsible for lowering the temperature of the fuel.
is located in the back of intake, aorund the middle of it close to firewall
I am getting ready to replace the EGR valve on my 1995 Mazda millenia. It is located at the back of the engine in the center at the top. It bolts on with 3 bolts. It will be a triangle shape. You will have to have a mirror to see it well. Any auto parts store should be able to show you exactly where it is.
The EGR valve is located at the right rear corner of the intake manifold, near the firewall. before unbolting the EGR valve, disconnect the vacuum line. - Mazda Repair Manual
where is the EGR valve on a 1989 mazda b2200
With 2.5 engine it will be on the rear lower of back head. It is an electronic EGR valve with a 6pin plug going to it.
It's attached to the back of the intake manifold, under the bracket that supports the wiring harness.
Were is the egr on a 1992 mazda protege
Were is the egr valve on a 99 Mazda progege 1.8
There is no egr valve on a 1990 Mazda MPV 6 cylinder
where do I find the egr valve on a 1999 Chevy Cavalier?
I Called the Mazda dealer today and talked with the Mazda Tech and asked him the location of the EGR valve on the 1992 Mazda b2600i. According to the tech only the California models have an EGR valve, I would think that any state with similar laws about vehicle emmisions would require the egr valve also. My truck is from Montana and it doesn't have an egr valve which explaines why I havent been able to find it.