The Heater core is difficult to replace on the F150 since it is buried in the plenum box. Getting to the core involves removing the steering wheel, steering column, complete dash panel, evacuating the AC, draining the radiator, and finally removing the heater box. Once you have the box out(8-12hrs), the core is simple to replace.
You want to be sure that the core is the problem before you undertake this process. If there is a strong smell of antifreeze in the cab or a puddle of coolant on the floor, the diagnosis is easy.
Check that the radiator is full, not the overflow tank, the radiator. On a cold engine you can remove the radiator cap and check the level. It should be full. If there is air in the system it will affect cab heating and engine cooling.
Another good check is to feel the two heater hoses going into the firewall from a cold start. The hoses should warm up at about the same rate and get uncomfortably hot-close to radiator temperature.
If the core appears to be OK, the next concern is with the blend door that diverts air through the heater core. This is a common failure on the F150. We have a video posted on our web site that shows how to diagnose and repair the system. Please follow my user name back to my bio page to find a cut-and-paste link to the web site. You are only a few clicks away from solving the problems.
heater control valve located on 2001 gmc jimmy 4.3l
Locate heater control valve in a 2001 Honda civic
A 2001 Chrysler Town and Country does not have a water control valve in the heater system. The cabin temperature is controlled with electric motors on airflow control doors.
The heater valve is located inside the heater box.
"Where is the heater controll valve on a 2001 Chevy S-10 controll Valve? "
The coolant valve to the heater sits above the heater matrix on the inlet pipes. It can be accessed from under the bonnet near the bulkhead below the windscreen.
there is one on the 2001 3.8l its by the firewall drivers side to the left of the power steering fluid.
Antifreeze/CoolantCooling FanPressure CapCoolant ReservoirHeater CoreHeater Control ValveEngine HeaterHVAC Hoses & ValvesHVACThermostat Description: A heater control valve may be located in one of the heater hoses to regulate coolant flow to the heater core. The valve is usually vacuum-controlled, which is operated by controls on the dash. Purpose: The valve is used help control heater output. Maintenance Tips/Suggestions:Insufficient heat, or heat that can�t be turned off may indicate a problem with the heater control valve. Inspect the valve to make sure that its vacuum line is properly connected. If the valve has an external linkage arm, operate the heater controls and watch to see if the valve changes position. If you have any doubts about the valve�s operation, have the heating system checked by a qualified service professional. http://www.carcare.org/Cooling_System/control_valve.shtml
Right under the throttle cover.
The heater is controlled by the same panel as the fan switch. The temperature is controlled by a cable that moves an airflow control door inside the HVAC housing. There is no water control valve if that is what you are looking for.
In 2012 about $40
Behind the intake plenum on the passenger side.