0
in the fuse panel drivers side behind the door marked HORN
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What to do if the horn of a 1996 Chevy Cavalier does not work?
Check the fuse!
Where is the fuse for the horn on a 1997 Chevy Cavalier?
The Horn uses the same fuse as the Cig lighter plug. It is a 15 amp fuse.
Where is the relay switch for the horn on a 98 Chevy Cavalier?
the horn does not have a relay on your car, does have a fuse inside the car, d.s dash
Where is horn fuse located on 1996 Chevy cavalier?
It's a relay, not a fuse, and it should be under the dash on the driver's side.
How do you fix the horn on a 1989 Chevy Cavalier?
Make sure the 1989 Chevrolet Cavalier horn fuse is in working condition. Make sure the positive and ground wires on the horn are tight and free of corrosion.
Where is the fuse for the horn in the 1995 Chevy Cavalier?
open the divers side door and there is a fuse pannel on the side of the dash and it has lables on wich fuses do what
Where is horn relay for 2003 Chevy Cavalier?
it is on the drivers side just under the dash right behind the fuse box.
Lighter works but horn doesnt Chevy cavalier 96?
The cigarette lighter (I'm assuming that's what you meant) is on a separate fuse than the horn. Check that fuse, if the fuse is fine then your most likely culpret is the actual horn switch in the steering wheel.
Which fuse is for the horn on a 2000 Chevy Silverado?
Where is the fuse for the horn on a 2000 chevy silverado?
What is the fuse for the cigarette lighter on a Chevrolet Cavalier?
cavalier the older ones the fuse for the cigarette lighter is the same as the horn fuse.
How do you replace the fuse for the horn and cigarette lighter in a 1997 Toyota Cavalier?
Chevy has cavaliers. (most fuse boxes are below the driver side by the left knee on Toyota's)
Where is the horn relay in a Chevrolet Cavalier?
the relay or fuse is under the dash board in the drivers side. you will need a flash light but it should be marked on the fuse box. on some of the cavaliers it is not the relay but the positive connection to the horn it self could be coroding. use sandpaper and reconnect.
