It is on the transmission. It has a vacuum hose connected to it. It is round, about two inches in diameter. Robert Foley.
according to a local dealer that model has no modulator valve on its automatic transmission sorry !
Who is a valve calibration for mazda b2200 1988
modulator is round and located on the drivers side of the transmission. modulator unscrews from the transmission if it is a 700 R4 It unbolts with 2 7/16 bolts if it is a turbo 350 Unplug the vaccum line remove the modulator replace with new modulator hook up new vaccuum line
It is located on the left side of the transmission right next to the shift lever just above the oil pan. There will be a small vacuum line coming off of it.
where is the ignition module located on a 1988 Mazda b2200
On a 1988 Mazda 626, the fuel pump relay is located in the fuel tank. Always disconnect the battery before beginning work on a fuel system.
it is located in the fuel tank
2.0i 12v 6-8Nm 2.0i 16v 4-6Nm 2.2i 6-8Nm.
More Info, If You Do Not Find A Modulator, You Could Have a Different Trans. If You Have A Square Pan With 16 Bolts Then You Have A 4L60 or TH700( no modulator on these) If the pan is oval and 17 Bolts Has 4L80 ( no modulator on these) Hope This Helps You Should Have A TH400 Trans & It Does Have A Modulator.
Facing the front of the truck, it is located on the intake manifold on the right side of the carb.
It should be at the base of the throttle body.
its on the tranny, drivers side lower porton of the bell housing